I have been trying to get this PC together for over a month now and all I been with is problems one after another.
When I first tried to install windows , I was coming up with "Pool Errors". I contacted the ram support (GSkill) and finally windows installed on slots 2 and 4 of the Mobo ,(vista would not install on in slots 1 and 3.
But when windows booted-up I was getting "Blue Screen Dump Errors". I ran memtest86 on the ram and came up with many errors.. When I tried to change setting according to the GSkill support, It would boot to vista and then the blue screen dump. Finally I got the blue screen errors to stop using by another gskill forum members "suggested settings".
Right now I am getting Blue Screen"Memory Management Errors" When I try to install some programs and update my drivers etc.
Yesterday I ran memtest86 on all 4 sticks for about 3 hrs. and then on each seperate stick in its own slot..with no errors
These are the PROBLEMS:
1 As soon as I go into my system config in vista to disable my start-up programs , up comes the Memory Manage Errors" and the blue screen shutdown ( I can only edit this in safe mode)
So far I tried to update my audo drivers,( Real-Tech , which came on the MoBo),Adobe Flash ,scanner drivers ,bios updates, lan updates. These won't install and Memory and still the memory management errors
Anything I try to download to check my drivers fail.
Things I could Install:
Printer and drivers(which I now uninstalled the drivers and have disconnected)
Programs downloaded from the internet, and programs like word, quicken etc.
Nvida Drivers and all my windows updates except for the realtech audio drivers
My device manager shows no errors on any of the drivers.
I was building this PC for my grandson for his games, but it has became a problem
I listed my present bios settings and specs below. These were all entered after I entered and saved my "Optimized Defaults"
Can I please get some help on solving this with my bios settings and the errors I am getting
I really don't care about overclocking right now, just to get it up and running without errors!!
Computer specs.
Vista 64 bit Home edition service pack 1
Case: Antec Sonata 3
Power Supply: Corsair 650W
Intel Core2 Quad 9550 2.83GHs LGA 775 95W
Gigabite EP45-UD3P Motherboard F8 rev 1.6
G.SKILL Model F2-8500CL5D-4X2 GBPK (8GB) Type 240-Pin DDR2 SDRAM
WD 1TB HD
Zalman CNP 9500 Cooling Fan
GeForce GTX 260 Video Card ( superclocked)
Samsung 22X DVD+R
LG Network Blue-ray Player
Robust Graphics Booster.........................[AUTO ]
CPU Clock Ratio.................................[8X ]
Fine CPU Clock Ratio............................[ 0.5]
CPU Frequency [2.83 ]GHz..........................[2.83GHZ(333X8.8 ]
******Clock Chip Control******
CPU Host Clock Control..........................[ DISABLED]
CPU Host Frequency (Mhz)........................[333 ]
PCI Express Frequency (Mhz).....................[100 ]
C.I.A 2 [ DISABLED]
******Advanced Clock Control******
CPU Clock Drive.................................[ 800]
PCI Express Clock Drive.........................[800]
CPU Clock Skew..................................[OPS ]
MCH Clock Skew..................................[ OPS]
******DRAM Performance Control******
Performance Enhance [STANDARD ]
Extreme Memory Profile (XMP)....................[ disable]
(G) MCH Frequency Latch.........................[AUTO ]
System Memory Multiplier.........................[2.40]
Memory Frequency 1066........................... 960
DRAM Timing Selectable..........................[MANUAL ]
CAS Latency Time................................[5 ]
tRCD............................................[5 ]
tRP.............................................[ 5]
tRAS............................................[18}
Advanced timing control
tRRD...............4.............................[4 ]
tWTR................4............................[4]
tWR................13.............................[8]
tRFC.................68...........................[68]
tRTP.................4...........................[4 ]
Command Rate (cmd)..............................[ 2]
******Channel A Timing Settings******
Static tRead Value [8 ] ................[ 7 ]
tRD Phase0 Adjustment [0 ] ................[AUTO ]
tRD Phase1 Adjustment [0 ] ................[ AUTO]
tRD Phase2 Adjustment [ 0] ................[AUTO ]
tRD Phase3 Adjustment [0 ] ................[ AUTO]
tRD 2rd (Different Rank) [8 ] ................[Auto]
tWR 2wr (Different Rank) [8 ] ................[AUTO ]
tWR 2rd (Different Rank) [ 7] ................[ AUTO]
tRD 2wr (Same/Difft Rank) [ 9] ................[AUTO ]
Dimm 1 Clock Skew Control.......................[AUTO ]
Dimm 2 Clock Skew Control.......................[AUTO ]
DDR Write Training..............................[AUTO ]
******Channel A Driving Settings******
Drive Strength Profile..........................[1066 mhz]
Data Driving Pull Up Level......................[ AUTO]
cmd Driving Pull Up Level.......................[AUTO ]
ctrl Driving Pull Up Level......................[AUTO ]
clk Driving Pull Up Level.......................[ AUTO]
Data Driving Pull Down Level....................[AUTO ]
cmd Driving Pull Down Level.....................[ AUTO]
ctrl Driving Pull Down Level....................[AUTO ]
clk Driving Pull Down Level.....................[ AUTO]
******Channel B Timing Settings******
Static tRead Value [8 ] ................[ AUTO ]
tRD Phase0 Adjustment [0 ] ................[AUTO ]
tRD Phase1 Adjustment [0 ] ................[AUTO ]
tRD Phase2 Adjustment [ 0] ................[AUTO ]
tRD Phase3 Adjustment [0 ] ................[AUTO ]
tRD 2rd (Differnt Rank) [8 ] ................[AUTO ]
tWR 2wr (Differnt Rank) [8 ] ................[AUTO ]
tWR 2rd (Differnt Rank) [7 ] ................[AUTO ]
tRD 2wr (Same/Difft Rank) [9 ] ................[AUTO ]
Dimm 1 Clock Skew Control.......................[ AUTO]
Dimm 2 Clock Skew Control.......................[AUTO ]
DDR Write Training..............................[ AUTO ]
******Channel B Driving Settings******
Drive Strength Profile..........................[1066]
Data Driving Pull Up Level......................[ AUTO]
cmd Driving Pull Up Level.......................[AUTO ]
ctrl Driving Pull Up Level......................[ AUTO]
clk Driving Pull Up Level.......................[AUTO ]
Data Driving Pull Down Level....................[AUTO ]
cmd Driving Pull Down Level.....................[ AUTO]
ctrl Driving Pull Down Level....................[AUTO ]
clk Driving Pull Down Level.....................[AUTO ]
******Motherboard Voltage Control******
Load-Line Calibration [ DIABLED ]
CPU Vcore [1.27500V ]...................(AUTO ]
CPU Termination [ 1.200V]...................[AUTO ]
CPU PLL [ 1.500V]...................[1.570 ]
CPU Reference [0760V ]...................[AUTO ]
MCH Core [1.00V ] ]...................[1.400 ]
MCH Reference [0760V ]...................[ AUTO]
MCH/DRAM Refernce [0.900V ]...................[AUTO ]
ICH I/O [ 1.500V]...................[ AUTO]
ICH Core [1.100V ]...................[ 1.200]
DRAM Voltage [1.800V ]...................[2.10]
DRAM Termination [ 0900V]...................[AUTO ]
Channel A Ref [0.900V ]...................[AUTO ]
Channel B Ref [ 0.900V]...................[AUTO ]
******Advanced BIOS Features******
Limit CPUID Max to 3...........................[ DISABLED]
No-Execute memory Protect.................[ DISABLED]
CPU Enhance Halt (CIE).......................[Disable ]
C2/C2E State Support.........................[DISABLED ]
C4/C4E State Support.........................[ DISABLED]
CPU Thermal Monitor...........................[ENABLED ]
CPU EIST Function...............................[Disabled]
Virtualization Technology......................[Disabled]
When I first tried to install windows , I was coming up with "Pool Errors". I contacted the ram support (GSkill) and finally windows installed on slots 2 and 4 of the Mobo ,(vista would not install on in slots 1 and 3.
But when windows booted-up I was getting "Blue Screen Dump Errors". I ran memtest86 on the ram and came up with many errors.. When I tried to change setting according to the GSkill support, It would boot to vista and then the blue screen dump. Finally I got the blue screen errors to stop using by another gskill forum members "suggested settings".
Right now I am getting Blue Screen"Memory Management Errors" When I try to install some programs and update my drivers etc.
Yesterday I ran memtest86 on all 4 sticks for about 3 hrs. and then on each seperate stick in its own slot..with no errors
These are the PROBLEMS:
1 As soon as I go into my system config in vista to disable my start-up programs , up comes the Memory Manage Errors" and the blue screen shutdown ( I can only edit this in safe mode)
So far I tried to update my audo drivers,( Real-Tech , which came on the MoBo),Adobe Flash ,scanner drivers ,bios updates, lan updates. These won't install and Memory and still the memory management errors
Anything I try to download to check my drivers fail.
Things I could Install:
Printer and drivers(which I now uninstalled the drivers and have disconnected)
Programs downloaded from the internet, and programs like word, quicken etc.
Nvida Drivers and all my windows updates except for the realtech audio drivers
My device manager shows no errors on any of the drivers.
I was building this PC for my grandson for his games, but it has became a problem
I listed my present bios settings and specs below. These were all entered after I entered and saved my "Optimized Defaults"
Can I please get some help on solving this with my bios settings and the errors I am getting
I really don't care about overclocking right now, just to get it up and running without errors!!
Computer specs.
Vista 64 bit Home edition service pack 1
Case: Antec Sonata 3
Power Supply: Corsair 650W
Intel Core2 Quad 9550 2.83GHs LGA 775 95W
Gigabite EP45-UD3P Motherboard F8 rev 1.6
G.SKILL Model F2-8500CL5D-4X2 GBPK (8GB) Type 240-Pin DDR2 SDRAM
WD 1TB HD
Zalman CNP 9500 Cooling Fan
GeForce GTX 260 Video Card ( superclocked)
Samsung 22X DVD+R
LG Network Blue-ray Player
Robust Graphics Booster.........................[AUTO ]
CPU Clock Ratio.................................[8X ]
Fine CPU Clock Ratio............................[ 0.5]
CPU Frequency [2.83 ]GHz..........................[2.83GHZ(333X8.8 ]
******Clock Chip Control******
CPU Host Clock Control..........................[ DISABLED]
CPU Host Frequency (Mhz)........................[333 ]
PCI Express Frequency (Mhz).....................[100 ]
C.I.A 2 [ DISABLED]
******Advanced Clock Control******
CPU Clock Drive.................................[ 800]
PCI Express Clock Drive.........................[800]
CPU Clock Skew..................................[OPS ]
MCH Clock Skew..................................[ OPS]
******DRAM Performance Control******
Performance Enhance [STANDARD ]
Extreme Memory Profile (XMP)....................[ disable]
(G) MCH Frequency Latch.........................[AUTO ]
System Memory Multiplier.........................[2.40]
Memory Frequency 1066........................... 960
DRAM Timing Selectable..........................[MANUAL ]
CAS Latency Time................................[5 ]
tRCD............................................[5 ]
tRP.............................................[ 5]
tRAS............................................[18}
Advanced timing control
tRRD...............4.............................[4 ]
tWTR................4............................[4]
tWR................13.............................[8]
tRFC.................68...........................[68]
tRTP.................4...........................[4 ]
Command Rate (cmd)..............................[ 2]
******Channel A Timing Settings******
Static tRead Value [8 ] ................[ 7 ]
tRD Phase0 Adjustment [0 ] ................[AUTO ]
tRD Phase1 Adjustment [0 ] ................[ AUTO]
tRD Phase2 Adjustment [ 0] ................[AUTO ]
tRD Phase3 Adjustment [0 ] ................[ AUTO]
tRD 2rd (Different Rank) [8 ] ................[Auto]
tWR 2wr (Different Rank) [8 ] ................[AUTO ]
tWR 2rd (Different Rank) [ 7] ................[ AUTO]
tRD 2wr (Same/Difft Rank) [ 9] ................[AUTO ]
Dimm 1 Clock Skew Control.......................[AUTO ]
Dimm 2 Clock Skew Control.......................[AUTO ]
DDR Write Training..............................[AUTO ]
******Channel A Driving Settings******
Drive Strength Profile..........................[1066 mhz]
Data Driving Pull Up Level......................[ AUTO]
cmd Driving Pull Up Level.......................[AUTO ]
ctrl Driving Pull Up Level......................[AUTO ]
clk Driving Pull Up Level.......................[ AUTO]
Data Driving Pull Down Level....................[AUTO ]
cmd Driving Pull Down Level.....................[ AUTO]
ctrl Driving Pull Down Level....................[AUTO ]
clk Driving Pull Down Level.....................[ AUTO]
******Channel B Timing Settings******
Static tRead Value [8 ] ................[ AUTO ]
tRD Phase0 Adjustment [0 ] ................[AUTO ]
tRD Phase1 Adjustment [0 ] ................[AUTO ]
tRD Phase2 Adjustment [ 0] ................[AUTO ]
tRD Phase3 Adjustment [0 ] ................[AUTO ]
tRD 2rd (Differnt Rank) [8 ] ................[AUTO ]
tWR 2wr (Differnt Rank) [8 ] ................[AUTO ]
tWR 2rd (Differnt Rank) [7 ] ................[AUTO ]
tRD 2wr (Same/Difft Rank) [9 ] ................[AUTO ]
Dimm 1 Clock Skew Control.......................[ AUTO]
Dimm 2 Clock Skew Control.......................[AUTO ]
DDR Write Training..............................[ AUTO ]
******Channel B Driving Settings******
Drive Strength Profile..........................[1066]
Data Driving Pull Up Level......................[ AUTO]
cmd Driving Pull Up Level.......................[AUTO ]
ctrl Driving Pull Up Level......................[ AUTO]
clk Driving Pull Up Level.......................[AUTO ]
Data Driving Pull Down Level....................[AUTO ]
cmd Driving Pull Down Level.....................[ AUTO]
ctrl Driving Pull Down Level....................[AUTO ]
clk Driving Pull Down Level.....................[AUTO ]
******Motherboard Voltage Control******
Load-Line Calibration [ DIABLED ]
CPU Vcore [1.27500V ]...................(AUTO ]
CPU Termination [ 1.200V]...................[AUTO ]
CPU PLL [ 1.500V]...................[1.570 ]
CPU Reference [0760V ]...................[AUTO ]
MCH Core [1.00V ] ]...................[1.400 ]
MCH Reference [0760V ]...................[ AUTO]
MCH/DRAM Refernce [0.900V ]...................[AUTO ]
ICH I/O [ 1.500V]...................[ AUTO]
ICH Core [1.100V ]...................[ 1.200]
DRAM Voltage [1.800V ]...................[2.10]
DRAM Termination [ 0900V]...................[AUTO ]
Channel A Ref [0.900V ]...................[AUTO ]
Channel B Ref [ 0.900V]...................[AUTO ]
******Advanced BIOS Features******
Limit CPUID Max to 3...........................[ DISABLED]
No-Execute memory Protect.................[ DISABLED]
CPU Enhance Halt (CIE).......................[Disable ]
C2/C2E State Support.........................[DISABLED ]
C4/C4E State Support.........................[ DISABLED]
CPU Thermal Monitor...........................[ENABLED ]
CPU EIST Function...............................[Disabled]
Virtualization Technology......................[Disabled]
Comment