GIGABYTE TOP X58A-UD9 with Intel Core i7 960/980X OC Performance Review

[windwithme]

[windwithme]

Re: GIGABYTE TOP X58A-UD9 with Intel Core i7 960/980X OC Performance Review

LGA1366 socket brand is LOTES


NB heat pipe also support water block.


Under the SB heatsink is Marvell SE9128 chip which supports SATA3.
UD9 design is more beautiful and better look than UD7.


USB 3.0 chip is NEC D720200F1
It uses 3x USB power design. Every USB PORT has individual power chip which provide 3X power.
It can avoid read/write error as connecting the external devices.


Full look after installing Hybird SILENT-PIPE
This external thermal module also used in X58-EXTREME and UD7.




Boot screen


BIOS main page


Main BIOS tuning page, M.I.T.


CPU 200Mhz/DDR3 2000 setup page

[windwithme]

Re: GIGABYTE TOP X58A-UD9 with Intel Core i7 960/980X OC Performance Review

CPU related items
C1E is for power saving.
Intel Turbo Boost is opposite with C1E. It can speed up CPU in high loading mode.


DDR3 Multiplier page


Memory setup page


Advanced parameters setup


Voltage page
Load-Line Calibration Standard/Level1/Level2
CPU Vcore 0.50000~1.90000V
QPI/Vtt Voltage 1.075~2.015V
IOH Core 1.000~2.000V
CPU PLL 1.000~2.580V
DRAM Voltage 1.300~2.600V


Load-Line Calibration has 3 modes
Standard by Intel VDroop voltage standard
Level 1 Lightly adjust VDroop
Level 2 Moderately adjustVDroop


USB、LAN、SATA、eSATA tuning page




PC Health Status


X58A-UD9 is the GIGABYTE most top product. The BIOS voltage and items are very rich.
But the items are similar to the other X58A series. I cannot the difference from this top model.
Below is my setting for Core i7 980X. You can refer to it if you have similar hardware.
I hope it’s useful for UD9 users to overclock.

System configuration
CPU: Intel Core i7-960/Core i7-980X Extreme Edition
MB: GIGABYTE GA-X58A-UD9
DRAM: CORSAIR DOMINATOR-GT CMG6GX3M3A2000C8
VGA: GIGABYTE GTX260 OC SLI 3WAY + PhysX
HD: CORSAIR CMFSSD-128GBG2D RAID 0
POWER: Antec TPQ-1200
Cooler: Mega Shadow Deluxe Edition
OS: Windows7 Ultimate 64bit

[windwithme]

[windwithme]

Re: GIGABYTE TOP X58A-UD9 with Intel Core i7 960/980X OC Performance Review

Temperature
System standby - 48~53


CPU full speed - 70~76
Intel Burn Test v2.4，Stress Level Maximum


The room temperature is around 25 degree C, and I think it’s acceptable.
If Core i7 enable HT, you need higher voltage and the power and temperature will be higher.

VGA is GIGABYTE GTX260 OC SLI 3WAY plus PhysX
For PSU, I recommend to use big watt product. The CPU and GPU power consumption is extreme huge.
I use Antec TPQ-1200 which pass 80Plus silver


TPQ-1200 packing and body are black and red. It’s racing car style.


3DMark Vantage => P28391
CPU SCORE => 52156
GPU SCORE => 24647


StreetFighter IV Benchmark
1920 X 1200 => 206.39FPS


Biohazard5 Benchmark
1280 X 800 => 147.4 fps


DEVIL MAY CRY4
1280 X 1024 => 278.86/230.45/326.68/190.17 fps


The Last Remnant
1280 X 720 => 189.31 fps


In this high spec PC, in common 3D benchmark software, you can see the result as below.
If the resolution is 1920 X 1200 above and enable all effects, the page will be as low as 50~100FPS.
The pity is GTX260 only can support 3WAY SLI. The 4th GTX260 use for PhysX, so it doesn’t help much for 3D performance.

DRAM DDR3 2000 CL8 8-8-24 1T
Sandra Memory Bandwidth - 32800 MB/s
EVEREST Memory Read - 21000 MB/s


LAG1366 platform strength is 3-channel DDR3. It enhances DRAM performance a lot.
Even LGA 1156 also cannot reach it as P55 only support dual channel DDR3.

[windwithme]

[windwithme]

Re: GIGABYTE TOP X58A-UD9 with Intel Core i7 960/980X OC Performance Review

StreetFighter IV Benchmark
1920 X 1200 => 207.50FPS


Biohazard5 Benchmark
1280 X 800 => 157.3fps


DEVIL MAY CRY4
1280 X 1024 => 281.75/228.55/322.73/192.28 fps


The Last Remnant
1280 X 720 => 173.71 fps


3DMark Vantage and Biohazard5 performance increase a lot as using 980X.
The other 3D benchmark is similar with 960. The Last Remnant performance is even lower than 960.
I used to read some reviews and many 3D GAME only can support 2 Cores CPU mode.
So the test result shows 4~6 Cores doesn’t help much for 3D performance.

DRAM DDR3 2000 CL8 8-8-24 1T
Sandra Memory Bandwidth - 30063 MB/s
EVEREST Memory Read - 18738 MB/s


980X DDR3 bandwidth, it’s lower 10% than 960 in the same condition.
2 CPU in NB Frequency are 3800 and 4000MHz. It also makes the difference of memory performance.

Power consumption
Standby - 354W


CPU full speed - 527W


980X has good performance of power and temperature because of 32nm technology.
I original expect 6C/12T 980X power and temperature is higher. After real test, it’s similar to 4C/8T i7 CPU.


GIGABYTE GA-X58A-UD9
Good at
1.X58A-UD9 uses UNLOCKED POWER design which support 1500W for CPU
2.Built-in NF200 to support both 4WAY ATI CFX and NVIDIA SLI
3.SATA3 uses more hi-end Marvell 9128 and USB is Japanese NEC
4.BIOS items are rich, higher voltage range and CPU/DDR3 OC ability is good
5.Built-in 6 SATAII, 2 USB/eSATA combo and 2 USB 3.0
6.Hybird SILENT-PIPE enhance the thermal solution and NB also support water block.

Bad at
1.UD9 price is 23000NTD, around 720USD. It’s the most expensive X58 in the market.
2.Product accessories are not luxury enough.
3.LAN and Audio are Realtek. Should consider to change higher grade.



Performance ★★★★★★★★★★
Components ★★★★★★★★★☆
Specification ★★★★★★★★★☆
Outlook ★★★★★★★★★★
C/P Value ★★★★★★☆☆☆☆

Entry X58 product price is around 7000~8500NTD, around 220~266USD.
High end X58 price is around 11000~16000NTD, 345~500USD.
UD9 price is 23000NTD, around 720USD. If it can be lower than 580USD, the C/P value will be higher.
For the accessories, if it has audio card, Intel LAN or more cables, it will be more attractive in components and spec.

GIGABYTE X58A-UD9 is the mark in the market. It has broken many OC world records.
So far there are also 2 brands have the similar product, and the form factor is bigger than ATX.
High price X58 design has hi-end components and OC. Also VGA support is another key factor.
4 PCI-E X16 and built-in NVIDIA NF200 can support both VGA 4WAY GPU technologies.
For high performance users, CPU can OC to higher standard and multi-GPU also can enhance the 3D perforamcne.



GIGABYTEX58A-UD9 shocks the X58 market. The price is record high.
Components and design are more focus on the body but not accessories and other spec.
But UD9 make GIGABYTE build a new mark in the market and better choice for extreme users.
As this kind of product, it’s used to build the leading position in branding. It’s not much helpful for selling.
For the users who interested in X58, GIGABYTE X58A UD3R~UD7 are better C/P value choices.
This is my, windwithme, 14th X58 review in 2 years.
For the past Core i7 4C/8T and 6C/12T difference is the key subject for this review.
I do hope this review can provide you more info about i7 CPU and X58 products.Thanks :)