I've been trying to get a new computer running and keep running into issues. After I install everything into the case and hook up a monitor, I turn it on and just get a blank screen. There is no signal that is output, no beeps, nothing.
Here are my specs:
ASRock 880G Pro3
G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-8GBRL - Totalling 32GB
AMD Phenom II X6 1090T Black Edition Thuban 3.2GHz 6 x 512KB L2 Cache 6MB L3 Cache Socket AM3 125W Six-Core Desktop Processor HDT90ZFBGRBOX
2 1TB SATA II Hard Drives
I've tried connecting a monitor using both the VGA and the DVI-D connection. Just a black screen. None of my power buttons on the case respond to the mother board after I turn it on, to shut it down I have to do a hard shut down via the power supply.
This exact same thing happened to me with the 890GX Pro3.
Here are my specs:
ASRock 880G Pro3
G.SKILL Ripjaws Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL9D-8GBRL - Totalling 32GB
AMD Phenom II X6 1090T Black Edition Thuban 3.2GHz 6 x 512KB L2 Cache 6MB L3 Cache Socket AM3 125W Six-Core Desktop Processor HDT90ZFBGRBOX
2 1TB SATA II Hard Drives
I've tried connecting a monitor using both the VGA and the DVI-D connection. Just a black screen. None of my power buttons on the case respond to the mother board after I turn it on, to shut it down I have to do a hard shut down via the power supply.
This exact same thing happened to me with the 890GX Pro3.
Comment