Tweet
I ran into codes 2A and 2C, from the Dr. Debug feature of this mother board. This is a new build and my 3rd to date. I haven't built a computer since 2004 back when IDE/ATA/AGP was around, so this new tech has me feeling like I took a step back on the evolutionary chart.
I'm trying to self diagnose another issue I'm having...psu flickers the lights and fans on my case and shuts down. Basically I'm stuck in the middle here. Not sure if I have a code issue or a psu issue. Figured I'd try with the codes here first to see what fellow ASRockers might know.
Any help or info would be greatly appreciated.
Below is my setup:
MOBO: ASRock 890FX Deluxe4
RAM: Kingston HyperX (2x2GB) 240-pin DDR3 SDRAM DDR3 1333 Memory Model KHX1333C7D3K2/4GX
GPU: XFX HD=687A-ZNFC Radeon HD 6870 1GB 356-bit DDR5 PCI Express 2.1 x16 HDCP
CPU: AMD Phenom II X4 955 Black Edition
PSU: Seasonic x650 Gold 650W ATX12V
CPU Cooler: Coolermaster V8
I'm trying to self diagnose another issue I'm having...psu flickers the lights and fans on my case and shuts down. Basically I'm stuck in the middle here. Not sure if I have a code issue or a psu issue. Figured I'd try with the codes here first to see what fellow ASRockers might know.
Any help or info would be greatly appreciated.
Below is my setup:
MOBO: ASRock 890FX Deluxe4
RAM: Kingston HyperX (2x2GB) 240-pin DDR3 SDRAM DDR3 1333 Memory Model KHX1333C7D3K2/4GX
GPU: XFX HD=687A-ZNFC Radeon HD 6870 1GB 356-bit DDR5 PCI Express 2.1 x16 HDCP
CPU: AMD Phenom II X4 955 Black Edition
PSU: Seasonic x650 Gold 650W ATX12V
CPU Cooler: Coolermaster V8