I just can't deal with this anymore. I have read and tried just about everything to alleviate this issue but it keeps popping up. I have had runs of 14 hours and 6 hours with no issues but now it is reboting virtually everytime I get into windows 7.
Here is what I have done so far:
Disabled IGP.
Updated all drivers
Change vcore voltage to 1.19 fixed
Change vcore voltage to +.07 offset
Use xmp profile 1 for ram
Set all bios settings to default
Ran windows mem diagnostic and mem test with no errors
Raised and lowered mem voltage from the standrard 1.529 volts
clear cmos
Boot into safe mode
Unplugged all usb cables
I probably have done some more things that I am forgetting about...basically every suggestion I found in this and other forums, I have tried and it hasn't solved the problem.
What happens is you will be doing something in windows and all of a sudden the screen goes black and a few seconds later the computer restarts. Sometimes it gets stuck at the splash screen and restarts 2 or 3 times before booting into windows. No event log from windows, no BSOD, no warning. Sometimes it happens while watching something, sometimes while surfing the net, sometimes while not doing anything. CPU is not overheating, temps never above 44c, GPU not overheating, temps not above 50, I am at a total loss as to how to fix this problem. Also at first bios splash screen was showing A2 in lower right corner but now it shows A3, not sure what that means if anything, since it doesn't affect the booting up usually.
Just built this cmp and have been running it about 5 days now. I7-2600k cpu, 12 gb Gskill Ripjawz DDR3 1600 RAM, Sapphire Radeon 6850 HD video card, Windows 7 ultimate, asrock extreme 3 gen 3 mobo, Enermax 500W PSU...
In hindsight I should have stuck wuth Gigabyte, my previous mobo in my last rig...never had 1 problem out of that board in over 5 years. Imho, there is something seriously wrong with these mobo's to keep having the same issues over and over. I will update bios to 1.10 as soon as I can get in and it stops rebooting but it doesn't appear like it will do much, since the big thing is supposedly improved mouse function. Not a happy camper right now...have never had this many issues with a mobo and I have built many, many computers in my day...
Here is the axtu screen showing PSU should not be the problem as voltages all look good and are stable...
Here is what I have done so far:
Disabled IGP.
Updated all drivers
Change vcore voltage to 1.19 fixed
Change vcore voltage to +.07 offset
Use xmp profile 1 for ram
Set all bios settings to default
Ran windows mem diagnostic and mem test with no errors
Raised and lowered mem voltage from the standrard 1.529 volts
clear cmos
Boot into safe mode
Unplugged all usb cables
I probably have done some more things that I am forgetting about...basically every suggestion I found in this and other forums, I have tried and it hasn't solved the problem.
What happens is you will be doing something in windows and all of a sudden the screen goes black and a few seconds later the computer restarts. Sometimes it gets stuck at the splash screen and restarts 2 or 3 times before booting into windows. No event log from windows, no BSOD, no warning. Sometimes it happens while watching something, sometimes while surfing the net, sometimes while not doing anything. CPU is not overheating, temps never above 44c, GPU not overheating, temps not above 50, I am at a total loss as to how to fix this problem. Also at first bios splash screen was showing A2 in lower right corner but now it shows A3, not sure what that means if anything, since it doesn't affect the booting up usually.
Just built this cmp and have been running it about 5 days now. I7-2600k cpu, 12 gb Gskill Ripjawz DDR3 1600 RAM, Sapphire Radeon 6850 HD video card, Windows 7 ultimate, asrock extreme 3 gen 3 mobo, Enermax 500W PSU...
In hindsight I should have stuck wuth Gigabyte, my previous mobo in my last rig...never had 1 problem out of that board in over 5 years. Imho, there is something seriously wrong with these mobo's to keep having the same issues over and over. I will update bios to 1.10 as soon as I can get in and it stops rebooting but it doesn't appear like it will do much, since the big thing is supposedly improved mouse function. Not a happy camper right now...have never had this many issues with a mobo and I have built many, many computers in my day...
Here is the axtu screen showing PSU should not be the problem as voltages all look good and are stable...
Comment