I have a problem with the ASRock Fatal1ty Z77 Professional.
When I turn on the PC, no signal to the monitor, it is 10-15 seconds, automatically turns OFF and turn ON again automatically.
Not always happens, it does so at random time.
But after turning on, it works fine, I have no problems.
I have to say that there are times when I have this problem, you can turn ON without signal on the monitor, and turn ON automatically, 3 or 4 times in a row.
Only this happens, the BUGLED shows me the code 36.
In the manual say:
0x36: CPU Post Memory inicialization. System Management Mode ( SMM ) initialization.
I have a 1.30 Bios version
My System:
► CPU: i7 2600k #4.6 GHz
► GPU: MSI GTX 680 Twin Frozr III OC Edition
► RAM: 16GB G.Skill Sniper #2133 MHz
► MB: AsRock Fatal1ty Z77 Professional
► SSD1: Corsair Force 3 60GB
► SSD2: G.Skill Phoenix Pro 60GB
► HDD: WD Caviar Blue 820GB
► PSU: Corsair HX850W
When I turn on the PC, no signal to the monitor, it is 10-15 seconds, automatically turns OFF and turn ON again automatically.
Not always happens, it does so at random time.
But after turning on, it works fine, I have no problems.
I have to say that there are times when I have this problem, you can turn ON without signal on the monitor, and turn ON automatically, 3 or 4 times in a row.
Only this happens, the BUGLED shows me the code 36.
In the manual say:
0x36: CPU Post Memory inicialization. System Management Mode ( SMM ) initialization.
I have a 1.30 Bios version
My System:
► CPU: i7 2600k #4.6 GHz
► GPU: MSI GTX 680 Twin Frozr III OC Edition
► RAM: 16GB G.Skill Sniper #2133 MHz
► MB: AsRock Fatal1ty Z77 Professional
► SSD1: Corsair Force 3 60GB
► SSD2: G.Skill Phoenix Pro 60GB
► HDD: WD Caviar Blue 820GB
► PSU: Corsair HX850W
Comment