EX38_DQ6 won't boot

[Traxover]

I've had my ex38-dq6 for 1m and today it just will not boot, no new drivers or hardware were installed.
Problem: When you turn it on board lights and cpu fan start, then after 5 secs it all stops and trys to start again. I've removed one memory stick but made not difference, I have removed battery and reset cmos and still nothing.

Any advice would be greatful.
I've always had gigbyte mob's for last 10 years and love them.

Trax

This is my second ex38-dq6 after the first one was rma'ed (its probelm was no life at all when powered up.)

[Lsdmeasap]

Re: EX38_DQ6 won't boot

Can you get into the BIOS at all?

What is your full specs? And did you mean 1m, meaning you JUST built it?

[Traxover]

Re: EX38_DQ6 won't boot

1m = worked OK 1 month.

Yes I'm unable to get into bio's at all, it shuts down and restarts before bio's screen. (i had one issue that was not normal before it stopped working my keyboard stopped working, so rebooted and that was it no start just cycling)

E6750 2.6ghz
2x 2gb G-skill PC8500 1066
Gigabyte 8800gtx
True power trio 650w
onboard sound

Hope this helps

Trax

[Lsdmeasap]

Re: EX38_DQ6 won't boot

Have you removed the battery (Easier to just put a jumper on the Clear CMOS pins, and then fully unplugged your PSU for 10 minutes or so?

If not try that, and then as you did, try with one stick of ram. Did you have the voltages set properly for MCH and RAM? 2x2 needs some tweaking to be stable

[Traxover]

Re: EX38_DQ6 won't boot

Guys great news

My gigabyte board is OK.

Found out one of my memory module is snuffed. Brought some new modules and inserted no issue.

Seems my trusty G-Skill ram died on me.

Thanks for all your help.

Trax

[Lsdmeasap]

Re: EX38_DQ6 won't boot

Great to hear!!!! Good thing you tested it

Go < Mushkin!!!