Announcement

Collapse
No announcement yet.

Critical error : not stable and test fail with all modul 2x2g pc8500 on EP35-DS3P

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Critical error : not stable and test fail with all modul 2x2g pc8500 on EP35-DS3P

    Iam can not stable memory with all seri DDR2 PC8500 (1066 mhz) more.
    Iam test with OCZ DDR2 Reaper X PC8500 , OCZ DDR2 FLEX II pc9200 (1150 MHZ) ,Crucial Ballistix Tracer 2X2g PC8500 1066 ,Corsair 4096MB (4 x 1024MB) PC2-8500 1066Mhz DDR2 RAM - 5-5-5-15 - Dominator.
    Iam using memtest 86 (dos ), memtest (windown) and pcmark2008 test memory :
    - Pass Bus 800 (all cas 4 & 5) memory multy :4 but over 860 mhz fail
    - Memory multiplier 3.33 /3.1 / 3 / 2.5 /2.4 /2 fail all test with memtest86 ,memtest ,and pcmark 2005 (memory test)
    my setting : 5-5-5-18 advanced timing all auto (vdim ok)
    Please test your produc with any DDr2 4g pc 8500 + and help me fix prolem or fix in next bios
    Thank You.
    Motherboar EP35 ds3p (ver 2.1)
    Cpu E8 seri
    Graphice Nvidia 8800GT
    PSU Silverton 550w
    Windown vista ultimas 32 bit
    --------------------------------------------------------------------
    my seting (bios F3)
    Robust Graphics Booster___________ [Auto]
    CPU Clock Ratio ____________ [xx]
    CPU Host Clock Control_ [Enabled]
    CPU Host Frequency (MHz)__________ [xxx]
    PCI Express Frequency (Mhz)_______ [100]
    C.I.A. 2__________________________ [Disabled]
    System Memory Multiplier (SPD)____ [4.00]
    DRAM Timing Selectable_______ SPD __ [Manual]
    Performance Enhance = [Standard]

    CAS Latency Time________________ 5
    Dram RAS# to CAS# Delay_________ 5
    Dram RAS# Precharge Delay_______5
    Precharge Delay (tRAS)__________ 18
    ACT to ACT Delay (tRRD)_________ auto
    Rank Write to READ Delay________ auto
    Write to Precharge Delay_________ auto
    Refresh to ACT Delay______________ auto
    Read to Precharge Delay__________ auto
    Static tRead Value_______________ auto
    Static tRead Phase Adjust________ auto

    System Voltage Control____ [Manual]
    DDR2 OverVoltage Control__ [+0.300V]
    PCI-E OverVoltage Control_ norman]
    FSB OverVoltage Control___ [+0.1V]
    (G)MCH OverVoltage Control [+0.1V]
    CPU Voltage Control_______ [1.25]
    Last edited by jackriper; 06-07-2008, 11:50 AM.
    Tags: None
  • #2
    Re: Critical error : not stable and test fail with all modul 2x2g pc8500 on EP35-DS3P

    YOu may need more then +1 MCH

    And I would suggest these as high starting points for 4GB 1066
    ACT to ACT Delay (tRRD)_________ 3-4
    Rank Write to READ Delay________ 3-4 or 9-11 May need 15-18 but try 9-11 first
    Write to Precharge Delay_________ 3-5
    Refresh to ACT Delay______________52-62 May need 68, but not likely *MOST IMPORTANT FOR 4GB*

    Read to Precharge Delay__________ 3-6
    Static tRead Value_______________ 7-10
    Static tRead Phase Adjust________ auto <<< Leave on Auto or Zero Or 1-31

    And just so you know, you may need a fan on your NB if it is hot (Feel it and if you cannot touch it for more then 10 seconds that is HOT)

    And also, those are brands I personally feel are not compatible with GA boards, but many get them to work. So just keep at it, memory settings are all trial and error. Lots of work for sure for 4gb at 1066
    Last edited by Lsdmeasap; 06-07-2008, 02:22 PM.

    Comment

    • #3
      Re: Critical error : not stable and test fail with all modul 2x2g pc8500 on EP35-DS3P

      Thank you for reply
      Originally posted by Lsdmeasap View Post
      YOu may need more then +1 MCH

      And I would suggest these as high starting points for 4GB 1066
      ACT to ACT Delay (tRRD)_________ 3-4
      Rank Write to READ Delay________ 3-4 or 9-11 May need 15-18 but try 9-11 first
      Write to Precharge Delay_________ 3-5
      Refresh to ACT Delay______________52-62 May need 68, but not likely *MOST IMPORTANT FOR 4GB*

      Read to Precharge Delay__________ 3-6
      Static tRead Value_______________ 7-10
      Static tRead Phase Adjust________ auto <<< Leave on Auto or Zero Or 1-31

      And just so you know, you may need a fan on your NB if it is hot (Feel it and if you cannot touch it for more then 10 seconds that is HOT)

      And also, those are brands I personally feel are not compatible with GA boards, but many get them to work. So just keep at it, memory settings are all trial and error. Lots of work for sure for 4gb at 1066
      I try all setting your recommentder but is also fail
      My NB 1fan 40 ,it is not hot (i can stable [email protected] with Orthos some day ,only prolem with memory 2G modul bus 900 ++ all SPD
      Hit please test help me and fix in next bios.
      Have you same setting and same my PC show me ?
      Last edited by jackriper; 06-08-2008, 12:51 AM.

      Comment

      • #4
        Re: Critical error : not stable and test fail with all modul 2x2g pc8500 on EP35-DS3P

        No I dont have the same settings, or pc or ram. But I do know what should work for that ram and your board settings

        Are you SURE those sticks are good and not DOA? Have you ran memtest86+ 2.01 on them at stock? If not do that >>>
        Memtest86+ - Advanced Memory Diagnostic Tool

        They could be DOA

        Comment

        • #5
          Re: Critical error : not stable and test fail with all modul 2x2g pc8500 on EP35-DS3P

          thx but it's good in asus p5k pro , abit p35 and asus p5q-E.
          I sure prolem i's memory controler in giga p35 motherboar

          Comment

          • #6
            Re: Critical error : not stable and test fail with all modul 2x2g pc8500 on EP35-DS3P

            I too have given up trying to run faster than 400 Mhz on my ram and be stable....till a newer bios comes out....
            Take care,
            Rick
            GA EP35 DS3P w/ E6400 @ 3.2 Ghz, 2 x 2Gb G-Skill PC8000, XFX 9600GT, Corsair TX 650W

            Comment

            • #7
              Re: Critical error : not stable and test fail with all modul 2x2g pc8500 on EP35-DS3P

              With those settings ANY ram should run up to 1000-1066, I can do it stable with my 800Mhz ram with those loose settings
              Last edited by Lsdmeasap; 11-30-2008, 11:56 PM.

              Comment

              • #8
                Re: Critical error : not stable and test fail with all modul 2x2g pc8500 on EP35-DS3P

                I have G-skills
                Take care,
                Rick
                GA EP35 DS3P w/ E6400 @ 3.2 Ghz, 2 x 2Gb G-Skill PC8000, XFX 9600GT, Corsair TX 650W

                Comment

                • #9
                  Re: Critical error : not stable and test fail with all modul 2x2g pc8500 on EP35-DS3P

                  Ahh, well Hemi, you shouldn't be having issues. Have you tried older BIOS's? Sometimes older ones clock better then newer ones

                  Comment

                  Previous template Next
                  Working...
                  X