Hi guys!
Last week I bought an ep45-ds3r mb. At the beginning I had big problems with system stability, so I changed some bios trying to solve the problem. After flashing F5 bios, I was not more able to set raid or ahci mode: after the post, when the bios checks sata drives connected, it stops and never go forward.
After this, I tried all bios (even F8 that I tried before F5, and raid worked that time) and with all of them I can't set raid/ahci mode.
I apparently solved stability problems (Too low voltage on ram), but now raid problem remains, so now I'll try to explain the problem better.
I have two sata2 hd connected to sata0 and sata1, and at the moment F8 bios. After loading optimized defaults and set raid on sata mode, the system restarts. After post mode, I have a screen that says:
"Serial ATA AHCI BIOS, version iSrc 1.07.00042006
Copyright (c) 2003-2006 Intel Corporation 23
** This version supports only Hard Disk and CDROM drives **
Please wait. This will take few seconds.
.........
Controller Bus#00, Device#1F, Function#02: 06 Ports, 02 Devices
_"
The last underscore is flashing, and the system doesn't go forward and show me "press CTRL-I...." and so on.
Every suggestion for solving my problem is welcome! (and sorry for my english )
Last week I bought an ep45-ds3r mb. At the beginning I had big problems with system stability, so I changed some bios trying to solve the problem. After flashing F5 bios, I was not more able to set raid or ahci mode: after the post, when the bios checks sata drives connected, it stops and never go forward.
After this, I tried all bios (even F8 that I tried before F5, and raid worked that time) and with all of them I can't set raid/ahci mode.
I apparently solved stability problems (Too low voltage on ram), but now raid problem remains, so now I'll try to explain the problem better.
I have two sata2 hd connected to sata0 and sata1, and at the moment F8 bios. After loading optimized defaults and set raid on sata mode, the system restarts. After post mode, I have a screen that says:
"Serial ATA AHCI BIOS, version iSrc 1.07.00042006
Copyright (c) 2003-2006 Intel Corporation 23
** This version supports only Hard Disk and CDROM drives **
Please wait. This will take few seconds.
.........
Controller Bus#00, Device#1F, Function#02: 06 Ports, 02 Devices
_"
The last underscore is flashing, and the system doesn't go forward and show me "press CTRL-I...." and so on.
Every suggestion for solving my problem is welcome! (and sorry for my english )
Comment