If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
dynamic Vcore works fine w/ my ud4p... it's magic ...
1.2625v for 4Ghz full, 1.06v idle... wonderfull !
There's just a question: since i've upgraded my bios, when my pc is on, the power led is blinking, before that, it was always on ... is itnormal or not ?
altrough, is there a tip for disabling bouble-boot if Bclk is fixed ??? it would be great
go to the "advanced voltage..." page...
set your vcore on "normal"
Dynamic Vcore will be enabled, set the value you want. (1.2625-1.1375=0.125v for me)
go to the "advanced cpu..." page
enable all energy features (eist+tm+c3-c5-c6)
disable c1e
save and quit bios...
reboot
go to the bios again, and verify that stock Vcore has not change.
if so, compute and set again Dynamic Vcore.
save and quit, that's all
EuP Lot 6 is a standard for reduced power consumption in idle mode. It does seem confusing as the F6 bios states its for revision 1.1 and the product page is for revision 1.0 of the P55M-UD2. Version 1.1 does have the EuP feature.
Thanks. So it sounds like its ok to install on my revision 1.0 board? I hope to have time to give it a try this weekend. I applied every F4 beta that came out but never did get around to moving from F4 (final) to F5.
Edit: Had some free time tonight so made the plunge. Updated to the F6 BIOS. Now hope to play around with it this weekend.
go to the "advanced voltage..." page...
set your vcore on "normal"
Dynamic Vcore will be enabled, set the value you want. (1.2625-1.1375=0.125v for me)
go to the "advanced cpu..." page
enable all energy features (eist+tm+c3-c5-c6)
disable c1e
save and quit bios...
reboot
go to the bios again, and verify that stock Vcore has not change.
if so, compute and set again Dynamic Vcore.
save and quit, that's all
ps: sorry for my poor english :)
LLC-???? Standard or Level 1 or Level 2.
i7-860(20x200)1.3v,Phanteks+3xTR TY-141, P55-UD6 F11d,G.Skill Trident PC 16000 9-9-9-27 1.6v 2x2 gb,Sapphire 7850 2gb OC, SSD Samsung 840pro 128gb,2x1TB WD BLUE 64MB SATA3 WD10EZEX,850W Seasonic M12 II Bronze SS-850AM, LG M2352D-PZ.
Anyone know when the next P55A-UD3 bios is coming out? I'm having a memory issue where it passes memtest for 6+ hours at cas9 1600, but locks up my system if it's set any higher than 1066. Ram is PGV34G1600ELK
Comment