If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
well mate i have just given it a go and nah still issues with this bios and my board :(
here is one for ya i can apply optimized defaults and press save settings and the board will refuse to even boot with optimized defaults, every time i press the save button in the bios even if i change the voltages only and reboot it will will post right up to code led : 64 then reboot then boot back up to 71 then reboot and then load back into the bios
sometimes or most of the time it will boot right up to 64 then go to 62 then reboot.
62 stands for PCH initilisation
and 64 is something do with memory.
-------------------------------------
totally and utterly confused, i can only put it down to that this bios hates my memory.
would love someone to test this bios out with avixer venom green 2133 cl9 2x 8gb sticks in both orange slots and see if they get the same issues until them i have no idea.....
^One trick.....Off PSU.....ON PSU and press ON on the casing....try.
Is that like a method of clearing all power from the capacitors and board,
haven't tried that but i tried the soft clr cmos button and that clears the power, also tried the hard clr cmos button and still the same issue. :/ if thats not what that method does i will give it a try.
its a very weird issue this like never had this type of issue before...
F7D works to perfection when it comes to board memory and cpu compatibility no issues at all but this bios is like broken in comparison lol
yeah mate i guess so, just tried it again with 1 stick and same issue, the board will not even save settings with out boot looping back to defaults with this bios.
i dont even think this is a memory issue.
just refuses to safe settings and bootloops are random places in the powerup it will only boot up to bios if i have the bios at default.. lol
defo something with this bios and this board even though it works for you its impossible for me wich is weird as we have the same board, only thing different is our memory but it should still work with 1 stick at generic defaults but it refuses. this X08 makes me think my board is broken.
Got a little tip for you stasio, stick your vring on auto and put your vccn voltage @1.190v and then you will get amazing stability on uncore and you can there for bump it up to 48x with ease. it should net you also faster system scores and benches aswel as faster memory speeds.
vccn is the key when going for high uncore :) i run 48x48x 1/1 with uncore @1.320v and 1.190v vccn :)
I really wish i could use X08 :(:(:( i have no idea why its not working for me arghhhhh..
Got a little tip for you stasio, stick your vring on auto and put your vccn voltage @1.190v and then you will get amazing stability on uncore and you can there for bump it up to 48x with ease. it should net you also faster system scores and benches aswel as faster memory speeds.
vccn is the key when going for high uncore :) i run 48x48x 1/1 with uncore @1.320v and 1.190v vccn :)
I really wish i could use X08 :(:(:( i have no idea why its not working for me arghhhhh..
Will try..thanks.
Edit:
You mean vccn voltage @1.900v ?
Comment