If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
hi! i have z390 aorus master and your bios f11m work super great for me! but how i can change rgb led om motherboard? RGB Fusion cant see motherboard on this bios! and i didn't see rgb setup in bios! what can i do? hate static orange :(
Search a few pages back in this thread.
F11m link with modded RGB is posted.....post #12216
Tested the f11n, better than most recent BIOS since f11j, can do FCLK 1900 without touching the voltages at optimized defaults, unfortunately still a hard wall at 1900 and does not like to go beyond it even after tweaking voltages. I'm still waiting for a better alternative than f11j.
I've got a 5800X on a B550i and I've tested almost all the different BIOS versions including the official F10 with Agesa 1.0.8.1 and now the latest F11n and I never can boot past the IF at 1867MHz. With my old 3600X it worked flawlessly at 1900 MHz. My RAM (G.Skill 3600 16-16-16-36) can do 3800 MHz at the XMP timings. I think the memory controller of mine 5800X is weak.
No luck with f31o for me. At default BIOS settings I get an immediate MACHINE CHECK EXCEPTION error after the Aorus logo passes. Nothing in BlueScreenView.
As always, turning off Core Performance Boost fixes the issue immediately. I can have XMP on or off, as long as Core Performance Boost is off it will run stable.
I've got a 5800X on a B550i and I've tested almost all the different BIOS versions including the official F10 with Agesa 1.0.8.1 and now the latest F11n and I never can boot past the IF at 1867MHz. With my old 3600X it worked flawlessly at 1900 MHz. My RAM (G.Skill 3600 16-16-16-36) can do 3800 MHz at the XMP timings. I think the memory controller of mine 5800X is weak.
Maybe, Have you tried f11j bios and move past 1900 FCLK. If not then most likely you have lost the silicon lottery.
Good chips have already booted 2100 FCLK but are unstable and throws lots of errors. Mediocre chips have broken 1900 FCLK barrier and struggle at 2000 FCLK and higher with the current BIOS state. Low quality chips cannot even reach 1900 FCLK.
Can anyone confirm that with a PCIE 3.0 Riser, that uninstalling GPU drivers will let a B550i switch automatically into 3.0 mode and show display?
It's somewhat annoying having to swap out the card every time I want to update bios
I was able to run 3600 CL 16 with the latest F31o BIOS just fine! (Samsung B-Die)
Everything higher not working for me right now. (FCLK > 1800 is crashing)
X570 Aorus xtreme , 5950x 4 corsair 8gb ram sticks, F31o, still a hard wall at 1900 fclk, 1900 boots without problems and is stable with vsoc 1056 and vddg 975, 1933 won't post no matter what voltages are choosen
Maybe, Have you tried f11j bios and move past 1900 FCLK. If not then most likely you have lost the silicon lottery.
Good chips have already booted 2100 FCLK but are unstable and throws lots of errors. Mediocre chips have broken 1900 FCLK barrier and struggle at 2000 FCLK and higher with the current BIOS state. Low quality chips cannot even reach 1900 FCLK.
Well, I don't think the whole chip is of low quality, because the lowest quality core is able to boost to 4.95 GHz and the rest to 5.00 / 5.05 GHz. But the memory controller seems of low quality. Even with F11j not able to boot with 1900MHz.
Do you have other examples which can't pass the 1867MHz? Maybe I need to tweak with SOC Voltage to get any higher.
F31o running fine on x570 Aorus Pro wifi at 1900/3800 on a 5800x. I was running f31k since I received my CPU on Saturday and I'm noticing any issues between BIOS versions. I have not tried going beyond 1900 fclk yet.
with membench of ryzen dram calcculator i get a new personal best result (115,0s) with f11n.
but cinebench r20 ist very poor. now i'm always under 5900pt. with f11m i got results about 5690 and with k i had about 6050 pt. (all stock setting ryzen master didn't used)
before f11n the mouse slept for 2-3 seconds about 20 seconds after booting. with f11n this little break after boot is fix.
X570 Aorus xtreme , 5950x 4 corsair 8gb ram sticks, F31o, still a hard wall at 1900 fclk, 1900 boots without problems and is stable with vsoc 1056 and vddg 975, 1933 won't post no matter what voltages are choosen
Have you tried using f31k bios, it is the f11j equivalent for x570 motherboards.
I was able to get stable 1967 FCLK and 3933Mhz on mixed RAM Kits.
Well, I don't think the whole chip is of low quality, because the lowest quality core is able to boost to 4.95 GHz and the rest to 5.00 / 5.05 GHz. But the memory controller seems of low quality. Even with F11j not able to boot with 1900MHz.
Do you have other examples which can't pass the 1867MHz? Maybe I need to tweak with SOC Voltage to get any higher.
Sorry I meant the quality of IO Die not the entire chip or the chiplet.
Comment