Announcement
Collapse
No announcement yet.
GIGABYTE Latest Beta BIOS
Collapse
This is a sticky topic.
X
X
-
Originally posted by Wechhe View PostIt is a bit weird that Asrock, MSI and ASUS are releasing AGESA 1.1.9.0 FINAL while Gigabyte is still struggling with BETA versions for AGESA 1.1.0.0
Only MSI and ASUS released initial stage of BIOS just for a few boards.
From MSI:
Expect a full rollout for the AGESA 1.1.9.0 BIOS Firmware for AMD's X570 & B550 motherboards around the end of December or early January.
As I said earlier, GB skipped Agesa 1.1.8.0 and (from this week) is working on Agesa 1.1.9.0.
Also GB didn't release BIOS for a few boards, instead for whole range.
- Likes 2
Comment
-
Anyone else notice on x570 F31q, the mouse speed is a little bit too much even in windows? regardless of what usb port (2, 3, 3.1) it is plugged in, it doesn't feel like the default 400dpi.
The mouse speed is way too high.
Comment
-
There is something broken with the curve optimizer algorithm on B550 auros pro v2 and 5900x. With auto voltage it reboots pc shortly after windows logon but with voltage set manually to 1.32 and SAME CURVE settings cpu just boosts to the moon. EDC doesn't go past 230. Can't go into bios after reset, you have to shutdown system to get in to bios. Basically, cpu with default voltage is gimped. What's the point to rise voltage to 1.45v when it can boost better with much lower voltage of 1.32v.
https://ibb.co/vq9kpfK
Comment
-
Originally posted by pandalay View PostThere is something broken with the curve optimizer algorithm on B550 auros pro v2 and 5900x. With auto voltage it reboots pc shortly after windows logon but with voltage set manually to 1.32 and SAME CURVE settings cpu just boosts to the moon. EDC doesn't go past 230. Can't go into bios after reset, you have to shutdown system to get in to bios. Basically, cpu with default voltage is gimped. What's the point to rise voltage to 1.45v when it can boost better with much lower voltage of 1.32v.
https://ibb.co/vq9kpfK
Also look at effective clock speed instead and CB single score difference
Comment
-
Hi guys, i have some problem, i have a SFF case with a pci 3.0 riser, a x570 i pro wifi motherboard and a rtx 3000.
the problem is that i need to put pci to gen 3 on the bios to make the graphics card to work, and everytime i flash a new bios i lose this configuration and i have to put a older card in the riser, go to the bios and change the pci to gen 3. This is a pain in the ass with my case (formd t1)
is there any way to preconfig the bios before flashing it? just need to put the pcie to gen3
Comment
-
-
Some bug reports for x470 gaming 7 and zen3 (managed to get 5900x yesterday):
- CPU Voltage setting does not work (same as it was for early zen2 bioses) - you can type anything in it, but it'll be locked at 1.1V for some reason. On the other hand, setting voltage through AMD OC menu works completely fine
- CCX OC is bugged - when you try to use it, some cores remain at base clocks (and it's weird - 3 cores are bugged for ccx0, but only 2 for ccx1)
- FCLK does not go above 1867, although you can BLCK it almost to 1900 with no issues.
Comment
-
-
ex. BIOS setting 1.400
idle reading is 1.440
load reading is 1.488!!!!
the difference is wayyyyy too much.
Comment
-
Should I be concerned?
Noticed my 5950x has been randomly restarting on my X570 Aorus Master on F30.
The BIOS is all at stock settings except for XMP and disabling SATA hot swap and not OCing anything.
Looking at event viewer, I see some WHEA event 18 errors and looking at the kernel logs from the crashes, it's a WHEA_UNCORRECTABLE_ERROR and blaming ntoskrnl.exe.
I'm hoping the inevitable final F31 BIOS will fix it, otherwise I dont know what else to point to that could be causing it.
Comment
Comment