If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
What about the Intel ME firmware? Won't there be a separate flash upgrade/update, for better KabyLake compatibility?
After checking GA-Z170X-Gaming 7 with ME Analyzer it seems the latest ME firmware is included in the new F20-versions. Here is a hardcopy
-------[ ME Analyzer v1.6.6 Dev 1 ]-------
Database r66
Firmware: Intel ME
Version: 11.6.0.1126
Release: Production
Type: Region, Extracted
FD: Unlocked
SKU: Consumer H
VCN: 120
PDM: Unknown
PV: Yes
Date: 20/09/2016
FIT Ver: 11.6.0.1126
Platform: SPT/KBP
Latest: Yes
What's the best way to contact gigabyte? For the z170x-gaming 5 motherboard, the F5 bios on their website gives a BAD7 checksum. The others are ok (F4 etc).
What's the best way to contact gigabyte? For the z170x-gaming 5 motherboard, the F5 bios on their website gives a BAD7 checksum. The others are ok (F4 etc).
I have used that bios myself and it was fine, maybe a corrupt download?
Anytime you download a new BIOS that you intend to flash you should download it twice and compare the checksums to minimise the chance of a corrupted download.
I had a corrupt download of BIOS F5 for my GA-Z170-HD3-DDR3 and I didn't find out until after I flashed it, which resulted in a bricked board that had to be recovered with a SPI programmer.
I thought that EZ flash would detect and catch a checksum mismatch if a BIOS file was corrupted but apparently not...
I had a corrupt download of BIOS F5 for my GA-Z170-HD3-DDR3 and I didn't find out until after I flashed it, which resulted in a bricked board that had to be recovered with a SPI programmer.
Okay, so: why didn't the Gigabyte "dual bios" feature allow booting from the backup bios?
Note: boot using Ctl + F10 should enable booting from the secondary bios, if the automatic function isn't working for some reason.
Good afternoon.
I have a motherboard GA-z170-HD3-DDR3 with bios f5c
With overclock non-K i5-6400 i have 27x162mhz=4374MHz. Vcore=1.21V.
All stable and cold(50 degrees Celsius with max load CPU)
But there is a bad moment, cold start the computer does not start with 1 times.
It helps: enter the bios & save and exit.
Maybe tell me how to solve this issue.
And tell me please,what bios latest with non K overclock.
Thanks.
My ram Crucial CT102464BA160B x 2pts = 16gb
Work on "System Memory Multiplier 10.66" = 1726MHZ perfect.
I try set multiplier to 8 =1300MHZ - no changes.
Try set Vcore up to 1.4V (1.25,1.3,1,325,etc) - no changes.
!!! Please HELP !!!
Reboot from windows - no problem.
Hey stasio, what has changed in GA-Z97X-Gaming 5 - F8a BIOS? Sorry if this has been asked before. I went back few pages but couldn't find any information.
Comment