ep45-UD3P --- Another Memory issue ( beginner need help )

[Neoob]

Hi guys i read a lot of your post here and saw that a lot of people have memory issues with this board.

I had mine juste a week ago beginning an upgrade on my system.

I have right now 4x512 of old XMS2 CM2x512-5400C4 4-4-4-12

I can run 3 of these finally after playing a little with voltage. ( Before this i had the reboot loop problem and it finally started with only 1 stick )

I don't know which information you need but i'm a not a pro and need your help to try to making work all my 4 slots :).

I'm at 1.8v right now


EP45-UD3P REV 1.1
F6 BIOS
E7300
PSU 550W
OLD!!! XT850XT PE 256 ( my 8800 GTS is dead )

Thx for your time!

[Neoob]

Re: ep45-UD3P --- Another Memory issue ( beginner need help )

nobody ?

[ill]

Re: ep45-UD3P --- Another Memory issue ( beginner need help )

Why not try 2048 MB x 2 instead? You'll get 4GB of DDR2 using two DIMMs. Won't have the problems you're having now. Look for timings like 5, 5, 5, 15. DDR2-1066 PC2-8500.

[powergiga]

Re: ep45-UD3P --- Another Memory issue ( beginner need help )

Why not try 2048 MB x 2 instead? You'll get 4GB of DDR2 using two DIMMs. Won't have the problems you're having now. Look for timings like 5, 5, 5, 15. DDR2-1066 PC2-8500.

I argeed.

pg

[Neoob]

Re: ep45-UD3P --- Another Memory issue ( beginner need help )

finally i boot with all of them but i'll upgrade anyway for 2x2gb like you said. Is there somewhere i can see the compatible ones ?

[xExcluSiv3x]

Re: ep45-UD3P --- Another Memory issue ( beginner need help )

How did you boot with all of them? What are all your settings??? I have the exact same board and i can only boot 1 RAM stick still :(

[Neoob]

Re: ep45-UD3P --- Another Memory issue ( beginner need help )

I've reset the cmos to default and after that verifying your ram voltage! it was to 1.8 and i putted in to auto mode, Dram to turbo and put manually my timing.

boot!