EP45-UD3P 4x 2GB G.Skill DDR2-1066

[phateddie]

[Eldan]

Re: EP45-UD3P 4x 2GB G.Skill DDR2-1066

I had the same deal with the UD3P and 8 GB of Patriot RAM. What finally worked for me was lowering the MCH core to 1.050V. I also set the command rate to 2 on the advice of Patriot but I'm not sure that makes a difference. Leave the timings and DRAM voltage exactly as G.Skill specs, set the 3.20B, but try lowering MCH. Hope it helps!

[phateddie]

[Lsdmeasap]

Re: EP45-UD3P 4x 2GB G.Skill DDR2-1066

So you all squared away now? If so, great to hear it!

Post back anytime if you have any questions or issues

[phateddie]

Re: EP45-UD3P 4x 2GB G.Skill DDR2-1066

Yes, no problems so far @ 1066 & 1.05. It follows the thread that collective wisdom isn't always correct.

[Lsdmeasap]

Re: EP45-UD3P 4x 2GB G.Skill DDR2-1066

Yeap, not all hardware is the same always. Nice to hear you are all up and running smoothly!!