Hi guys
New here.
Got a problem with my 4 months old PC.
System is:
Gigabyte GA-EX58-UD5 (Not able to see bios lvl)
HIS Radeon HD 4870X2
Kingston DDR3 HyperX 1600MHz 6GB
Processor i7-920
Northq Black Magic Flex 850W
Machine was running just fine, then all of a sudden it wouldn't boot.
No beep codes.
Nothing on screen.
All fans running.
Little display on mobo stops at "CI", but i don't use that feature.
I tried:
Another GFX, in both PCI-e slot.
All HD's are off.
A different screen.
Each mem block in each slot and boot.
Removed all mem blocks, which gave me no beep code!?!
CPU clensed and new cooling paste applied.
System ran from day 1 without any issues. Has been running last 4 months. I'm using stock CPU cooling, but CPU never exceeded 50 d. celc. System actually cools so much with Antec 1200 Chassis, that i can feel a cool breeze under the table where is stands.
Advise please
New here.
Got a problem with my 4 months old PC.
System is:
Gigabyte GA-EX58-UD5 (Not able to see bios lvl)
HIS Radeon HD 4870X2
Kingston DDR3 HyperX 1600MHz 6GB
Processor i7-920
Northq Black Magic Flex 850W
Machine was running just fine, then all of a sudden it wouldn't boot.
No beep codes.
Nothing on screen.
All fans running.
Little display on mobo stops at "CI", but i don't use that feature.
I tried:
Another GFX, in both PCI-e slot.
All HD's are off.
A different screen.
Each mem block in each slot and boot.
Removed all mem blocks, which gave me no beep code!?!
CPU clensed and new cooling paste applied.
System ran from day 1 without any issues. Has been running last 4 months. I'm using stock CPU cooling, but CPU never exceeded 50 d. celc. System actually cools so much with Antec 1200 Chassis, that i can feel a cool breeze under the table where is stands.
Advise please
Comment