I just built an i7 system with a EX58-UD3R motherboard (BIOS version f2).
RAM is 3x2gig Corsair XMS3 TR3X6G1333C9 DDR3.
A few days ago I tried changing my memory multiplier and timings to match the specs of the RAM (1333 @ 9-9-9-24).
It worked fine... ran memtest86+ and had no errors.
Temperature was a degree or so hotter, but that's about it.
Last night I switched one of my fans from sys_fan2 to sys_fan1 after realising that sys_fan2 is 5v, and when I tried to boot up I got stuck at the Vista (64bit) loading screen. I restarted via front reset button and the BIOS reset itself and computer rebooted. I rebooted again and went into BIOS and got a message saying something about an error occuring due to overclocking or over voltage... I haven't done anything except change memory multiplier and timings.
Can someone help me?
RAM is 3x2gig Corsair XMS3 TR3X6G1333C9 DDR3.
A few days ago I tried changing my memory multiplier and timings to match the specs of the RAM (1333 @ 9-9-9-24).
It worked fine... ran memtest86+ and had no errors.
Temperature was a degree or so hotter, but that's about it.
Last night I switched one of my fans from sys_fan2 to sys_fan1 after realising that sys_fan2 is 5v, and when I tried to boot up I got stuck at the Vista (64bit) loading screen. I restarted via front reset button and the BIOS reset itself and computer rebooted. I rebooted again and went into BIOS and got a message saying something about an error occuring due to overclocking or over voltage... I haven't done anything except change memory multiplier and timings.
Can someone help me?
Comment