To all Potential Gigabyte fan undecided....
I have find the Working recipe....with all the ingredients
The experience was very smooth
with EP45 UD3P and E8400 running now at 3.8MHz
With a the new Bios Now Flash to (F9)
It have solved a Problem with Vista 64 returning from Sleep
So now....and the last few days temperature at 33c (low) and 40c (high)
I would like to Thank LSDmeasap and Outer....
for There guidance
and good luck to all new comers.... you find the right place for support
The recipe
Robust Graphics Booster ...............: [Auto]
CPU Clock Ratio .......................: [ 9]
Fine CPU Clock Ratio...................: +0.0
CPU Frequency .........................: 3.83GHz
Clock Chip Control
Standard Clock Control
CPU Host Clock Control.................: [Enabled]
CPU Host Frequency (Mhz) ..............: 426Mhz
PCI Express Frequency (Mhz) ...........: 100
C.I.A.2 ...............................: [Disabled]
Advanced Clock Control [Press Enter]
CPU Clock Drive........................: 800mV
PCI Express Clock Drive................: 900mV
CPU Clock Skew (ps)....................: 0ps
MCH Clock Skew (ps)....................: 0ps
DRAM Performance Control
Performance Enhance....................: [STANDARD]
Extreme Memory Profile (X.M.P.)........: [Disabled]
(G)MCH Frequency Latch.................: Auto
System Memory Multiplier ..............: 2.40D
Memory Frequency (Mhz) ................: 1022
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time.......................: 5
tRCD ..................................: 5
tRP'...................................: 5
tRAS...................................: 15
Advanced Timing Control
tRRD...................................: 5
tWTR...................................: 5
tWR....................................: 8
tRFC...................................: 54
tRTP...................................: 4
Command Rate (CMD) ....................: 2
Driving Strength Profiles
Driving Strength ......................: 1066
Channel A
Static tRead Value.....................: 8
tRD Phase0 Adjustment..................: [Auto]
tRD Phase1 Adjustment..................: [Auto]
tRD Phase2 Adjustment .................: [Auto]
tRD Phase3 Adjustment..................: [Auto]
Trd2rd(Different Rank).................: [Auto]
Twr2wr(Different Rank).................: [Auto]
Twr2rd(Different Rank).................: [Auto]
Trd2wr(Same/Diff Rank).................: [Auto]
Dimm1 Clock Skew Control...............: [Auto]
Dimm2 Clock Skew Control...............: [Auto]
DDR Write Training.....................: [Auto]
Channel B
Static tRead Value.....................: 8
tRD Phase0 Adjustment..................: [Auto]
tRD Phase1 Adjustment..................: [Auto]
tRD Phase2 Adjustment .................: [Auto]
tRD Phase3 Adjustment..................: [Auto]
Trd2rd(Different Rank).................: [Auto]
Twr2wr(Different Rank).................: [Auto]
Twr2rd(Different Rank).................: [Auto]
Trd2wr(Same/Diff Rank).................: [Auto]
Dimm1 Clock Skew Control...............: [Auto]
Dimm2 Clock Skew Control...............: [Auto]
DDR Write Training.....................: [Auto]
Motherboard Voltage Control
Voltage Type...........................: [Manual]
CPU---------------------Normal-----------Current
Load Line Calibration..................: [Disabled]
CPU Vcore...............1.25000V.......: 1.33125V
CPU Termination.........1.200V.........: 1.200V
CPU PLL.................1.500V.........: 1.500V
CPU Reference...........0.760V.........: [Auto]
MCH/ICH
MCH Core................1.100V.........: 1.220V
MCH Reference...........0.760V.........: [Auto]
MCH/DRAM Reference......0.900V.........: [Auto]
ICH I/O.................1.500V.........: 1.500V
ICH Core................1.100V.........: 1.100V
DRAM
DRAM Voltage............1.800V.........: 2.1V
DRAM Termination........0.900V.........: [Auto]
Channel A Reference.....0.900V.........: [Auto]
Channel B Reference.....0.900V.........: [Auto]
Advanced Settings
Limit CPUID Max. to 3..................: [Disabled]
No-Execute Memory Protect..............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support...................: [Disabled]
x C4/C4E State Support.................: [Disabled]
CPU Thermal Monitor 2(TM2) ............: [Enabled]
CPU EIST Function......................: [Disabled]
Virtualization Technology..............: [Disabled]
Integrated Peripherals
Legacy USB Storage Detect .............: [Disabled]
I have find the Working recipe....with all the ingredients
The experience was very smooth
with EP45 UD3P and E8400 running now at 3.8MHz
With a the new Bios Now Flash to (F9)
It have solved a Problem with Vista 64 returning from Sleep
So now....and the last few days temperature at 33c (low) and 40c (high)
I would like to Thank LSDmeasap and Outer....
for There guidance
and good luck to all new comers.... you find the right place for support
The recipe
Robust Graphics Booster ...............: [Auto]
CPU Clock Ratio .......................: [ 9]
Fine CPU Clock Ratio...................: +0.0
CPU Frequency .........................: 3.83GHz
Clock Chip Control
Standard Clock Control
CPU Host Clock Control.................: [Enabled]
CPU Host Frequency (Mhz) ..............: 426Mhz
PCI Express Frequency (Mhz) ...........: 100
C.I.A.2 ...............................: [Disabled]
Advanced Clock Control [Press Enter]
CPU Clock Drive........................: 800mV
PCI Express Clock Drive................: 900mV
CPU Clock Skew (ps)....................: 0ps
MCH Clock Skew (ps)....................: 0ps
DRAM Performance Control
Performance Enhance....................: [STANDARD]
Extreme Memory Profile (X.M.P.)........: [Disabled]
(G)MCH Frequency Latch.................: Auto
System Memory Multiplier ..............: 2.40D
Memory Frequency (Mhz) ................: 1022
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time.......................: 5
tRCD ..................................: 5
tRP'...................................: 5
tRAS...................................: 15
Advanced Timing Control
tRRD...................................: 5
tWTR...................................: 5
tWR....................................: 8
tRFC...................................: 54
tRTP...................................: 4
Command Rate (CMD) ....................: 2
Driving Strength Profiles
Driving Strength ......................: 1066
Channel A
Static tRead Value.....................: 8
tRD Phase0 Adjustment..................: [Auto]
tRD Phase1 Adjustment..................: [Auto]
tRD Phase2 Adjustment .................: [Auto]
tRD Phase3 Adjustment..................: [Auto]
Trd2rd(Different Rank).................: [Auto]
Twr2wr(Different Rank).................: [Auto]
Twr2rd(Different Rank).................: [Auto]
Trd2wr(Same/Diff Rank).................: [Auto]
Dimm1 Clock Skew Control...............: [Auto]
Dimm2 Clock Skew Control...............: [Auto]
DDR Write Training.....................: [Auto]
Channel B
Static tRead Value.....................: 8
tRD Phase0 Adjustment..................: [Auto]
tRD Phase1 Adjustment..................: [Auto]
tRD Phase2 Adjustment .................: [Auto]
tRD Phase3 Adjustment..................: [Auto]
Trd2rd(Different Rank).................: [Auto]
Twr2wr(Different Rank).................: [Auto]
Twr2rd(Different Rank).................: [Auto]
Trd2wr(Same/Diff Rank).................: [Auto]
Dimm1 Clock Skew Control...............: [Auto]
Dimm2 Clock Skew Control...............: [Auto]
DDR Write Training.....................: [Auto]
Motherboard Voltage Control
Voltage Type...........................: [Manual]
CPU---------------------Normal-----------Current
Load Line Calibration..................: [Disabled]
CPU Vcore...............1.25000V.......: 1.33125V
CPU Termination.........1.200V.........: 1.200V
CPU PLL.................1.500V.........: 1.500V
CPU Reference...........0.760V.........: [Auto]
MCH/ICH
MCH Core................1.100V.........: 1.220V
MCH Reference...........0.760V.........: [Auto]
MCH/DRAM Reference......0.900V.........: [Auto]
ICH I/O.................1.500V.........: 1.500V
ICH Core................1.100V.........: 1.100V
DRAM
DRAM Voltage............1.800V.........: 2.1V
DRAM Termination........0.900V.........: [Auto]
Channel A Reference.....0.900V.........: [Auto]
Channel B Reference.....0.900V.........: [Auto]
Advanced Settings
Limit CPUID Max. to 3..................: [Disabled]
No-Execute Memory Protect..............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support...................: [Disabled]
x C4/C4E State Support.................: [Disabled]
CPU Thermal Monitor 2(TM2) ............: [Enabled]
CPU EIST Function......................: [Disabled]
Virtualization Technology..............: [Disabled]
Integrated Peripherals
Legacy USB Storage Detect .............: [Disabled]
Comment