-
Last edited by Thorak; 04-28-2009, 07:26 PM.CPU: [email protected]|| Corsair 780T
Mainboard: Fatal1ty Z170 Gaming K6: 1.70
Mem: G-Skill RipJaws V Black 3200Mhz
Video: Asus R9290-4GD5-WC || Samsung 275T+ 27"
HDD: Sandisk Extreme 250GB SDD + 3x Samung F3 1TB RAID5
Sound: Asus Xonar D2/PM
PSU: Enermax Revolution 85+ 1050W
Cooling: Custom WaterCooled
OS: Windows 10 -
Re: X38-DQ6 Reboots when overclocking
0 experience of the board but ,ive read the chipset gets v hot.perhaps a combination of increased voltage and direct fan cooling on the chipset.Current Systems:
Asrock p67 Extreme6.............. Gigabyte EP-45 UD3 ...................... Gigabyte 73 PVM S2
Intel i5 2500k 4.8ghz................ Intel Q8400 3.8ghz......................... Intel D820 2.8ghz
Zalman 10x cooler.................... Coolermaster V8............................ HP cooler
8GB Gskill ripjaw ddr3.............. 4GB Gskill PI ddr2.......................... 4GB samsung ddr2
60GB ssd/500GB HDD .............. WD 1TB hdd.................................... Seagate 160GB hdd
GTX 460 1GB x2 SLI ................. Msi 9600GT 512MB(died) ........... Onboard gx
Win7 64 ,750w psu(ocz)............ Win7 64 ,520w psu,seasonic...... Win XP pro ,400w psu
HEC 6A34 case . ....................... Jeantec R2 case............................ Packard Bell case
hoping to upgrade to http://www.thinkgeek.com/stuff/41/habicase.shtml
http://www.flixya.com/video/140325/Animal-launching -
CPU: [email protected]|| Corsair 780T
Mainboard: Fatal1ty Z170 Gaming K6: 1.70
Mem: G-Skill RipJaws V Black 3200Mhz
Video: Asus R9290-4GD5-WC || Samsung 275T+ 27"
HDD: Sandisk Extreme 250GB SDD + 3x Samung F3 1TB RAID5
Sound: Asus Xonar D2/PM
PSU: Enermax Revolution 85+ 1050W
Cooling: Custom WaterCooled
OS: Windows 10Comment
-
Re: X38-DQ6 Reboots when overclocking
Can somebody give me some clues for whats wrong ?
Thank youCPU: [email protected]|| Corsair 780T
Mainboard: Fatal1ty Z170 Gaming K6: 1.70
Mem: G-Skill RipJaws V Black 3200Mhz
Video: Asus R9290-4GD5-WC || Samsung 275T+ 27"
HDD: Sandisk Extreme 250GB SDD + 3x Samung F3 1TB RAID5
Sound: Asus Xonar D2/PM
PSU: Enermax Revolution 85+ 1050W
Cooling: Custom WaterCooled
OS: Windows 10Comment
-
Re: X38-DQ6 Reboots when overclocking
I've tried to do something similar to this profile with no success....
CPU: [email protected]|| Corsair 780T
Mainboard: Fatal1ty Z170 Gaming K6: 1.70
Mem: G-Skill RipJaws V Black 3200Mhz
Video: Asus R9290-4GD5-WC || Samsung 275T+ 27"
HDD: Sandisk Extreme 250GB SDD + 3x Samung F3 1TB RAID5
Sound: Asus Xonar D2/PM
PSU: Enermax Revolution 85+ 1050W
Cooling: Custom WaterCooled
OS: Windows 10Comment
-
Re: X38-DQ6 Reboots when overclocking
I'm going to make my last try in this forum to help me on this overclocking problem.
I tried a great number of settings and no way i can boot with CPU Host Clock Control enabled.
I even tried to downclock my CPU using 6x multiplier. And very conservative RAM settings.
To note that I can use my memory with 3A memory divider at 5 5 5 15 with CPU Host Clock Control disabled with no problems.
I overclocked this processor above 3Ghz in a Abit IP35 Pro with no problems, so its not a CPU issue.
Also tried this settings to boot at 3.2GHZ
Computertechnik JZelectronic in the topic:
Overclocking Tipps mit Gigabyte X38 Boards und OCI 2GB HQ Speichermodulen
CPU: [email protected]|| Corsair 780T
Mainboard: Fatal1ty Z170 Gaming K6: 1.70
Mem: G-Skill RipJaws V Black 3200Mhz
Video: Asus R9290-4GD5-WC || Samsung 275T+ 27"
HDD: Sandisk Extreme 250GB SDD + 3x Samung F3 1TB RAID5
Sound: Asus Xonar D2/PM
PSU: Enermax Revolution 85+ 1050W
Cooling: Custom WaterCooled
OS: Windows 10Comment
-
Re: X38-DQ6 Reboots when overclocking
You dont have speedstep enabled right? C1E? CPU Throttling??Gigabyte X58 UD5 Rev 1.0, X5670 @ 4.2GHz GTX980TiComment
Tweet
Comment