Hi,
I'm not sure if I should be worried, so I thought I would check. Things seem to be running fine. I ran IntelBurn for 5 iterations (maximum stress) and passed which is great, but my maximum temperature according to Real Temp was 72C which seems high.
According to CPU-Z, my core voltage is 1.328V
Here are the O/C settings I'm using which have seemed stable so far. Please let me know if you spot anything that looks crazy or even risky. Thanks!
I'm not sure if I should be worried, so I thought I would check. Things seem to be running fine. I ran IntelBurn for 5 iterations (maximum stress) and passed which is great, but my maximum temperature according to Real Temp was 72C which seems high.
According to CPU-Z, my core voltage is 1.328V
Here are the O/C settings I'm using which have seemed stable so far. Please let me know if you spot anything that looks crazy or even risky. Thanks!
Code:
MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster .................: [Auto] CPU Clock Ratio .........................: 9 Fine CPU Clock Ratio.....................:.0 CPU Frequency ...........................: 3.99GHz (444x9) Clock Chip Control Standard Clock Control CPU Host Clock Control...................: [Enabled] CPU Host Frequency (Mhz) ................: 444Mhz PCI Express Frequency (Mhz) .............:Set to 100 C.I.A.2 .................................:[Disabled] Advanced Clock Control [Press Enter] CPU Clock Drive..........................: 800 PCI Express Clock Drive..................: 900 CPU Clock Skew (ps)......................: 0ps MCH Clock Skew (ps)......................: 0ps DRAM Performance Control Performance Enhance......................: [Turbo] Extreme Memory Profile (X.M.P.)..........: [Auto] (G)MCH Frequency Latch...................: [Auto] System Memory Multiplier ................: 2.40B Memory Frequency (Mhz) ..................: 1066 DRAM Timing Selectable ..................: [Manual] Standard Timing Control CAS Latency Time.........................: 5 tRCD ....................................: 5 tRP'.....................................: 5 tRAS.....................................: 15 Advanced Timing Control tRRD.....................................: [Auto] tWTR.....................................: [Auto] tWR......................................: [Auto] tRFC.....................................: [Auto] tRTP.....................................: [Auto] Command Rate (CMD) ......................: [Auto] Driving Strength Profiles Driving Strength ........................: 1066 Channel A Static tRead Value.......................: [Auto] tRD Phase0 Adjustment....................: [Auto] tRD Phase1 Adjustment....................: [Auto] tRD Phase2 Adjustment ...................: [Auto] tRD Phase3 Adjustment....................: [Auto] Trd2rd(Different Rank)...................: [Auto] Twr2wr(Different Rank)...................: [Auto] Twr2rd(Different Rank)...................: [Auto] Trd2wr(Same/Diff Rank)...................: [Auto] Dimm1 Clock Skew Control.................: [Auto] Dimm2 Clock Skew Control.................: [Auto] Channel B Static tRead Value.......................: [Auto] tRD Phase0 Adjustment....................: [Auto] tRD Phase1 Adjustment....................: [Auto] tRD Phase2 Adjustment ...................: [Auto] tRD Phase3 Adjustment....................: [Auto] Trd2rd(Different Rank)...................: [Auto] Twr2wr(Different Rank)...................: [Auto] Twr2rd(Different Rank)...................: [Auto] Trd2wr(Same/Diff Rank)...................: [Auto] Dimm1 Clock Skew Control.................: [Auto] Dimm2 Clock Skew Control.................: [Auto] Load-Line Calibration....................: [Enabled] CPU CPU Vcore................................: 1.35 CPU Termination........... 1.200V*.......: [Auto] CPU PLL....................1.500V*.......: [Auto] CPU Referen................0.755V*.......: 0.778 MCH/ICH MCH Core...................1.100V........: 1.34V MCH Reference..............0.800V........: 0.783V MCH/DRAM Ref...............0.900V........: [Auto] ICH I/O....................1.500V........: [Auto] ICH Core...................1.100V........: [Auto] DRAM DRAM Voltage ..............1.800V........: [Auto] DRAM Termination ..........0.900V........: [Auto] Channel A Reference .......0.900V........: [Auto] Channel B Reference .......0.900V........: [Auto] Advanced Settings Limit CPUID Max. to 3....................: [Disabled] No-Execute Memory Protect................: [Enabled] CPU Enhanced Halt (C1E)..................: [Disabled] C2/C2E State Support.....................: [Disabled] x C4/C4E State Support...................: [Disabled] CPU Thermal Monitor 2(TM2) ..............: [Enabled] CPU EIST Function........................: [Disabled] Virtualization Technology................: [Enabled] Integrated Peripherals Legacy USB Storage Detect ...............: [Enabled]
Comment