Re: GA-EP45-UD3P - Won't boot with 450FSB
You almost owed me a new keyboard on that one.![Clap](https://www.tweaktownforum.com/core/images/smilies/clap.gif)
-devoh
Originally posted by profJim
View Post
You almost owed me a new keyboard on that one.
![Clap](https://www.tweaktownforum.com/core/images/smilies/clap.gif)
-devoh
*************************************** *************************************** Gigabyte GA-EP45-UD3P (Rev. 1.0) - F10b *************************************** *************************************** ****************************** MB Intelligent Tweaker(M.I.T.) ****************************** Robust Graphics Booster ..............: [Auto] CPU Clock Ratio ......................: [8X] x Fine CPU Clock Ratio................: +0.0 CPU Frequency ........................: 4.32GHz( 540x8.0) ********** Clock Chip Control ******** >>>>> Standard Clock Control CPU Host Clock Control................: [Enabled] x CPU Host Frequency(Mhz).............: [ 540] PCI Express Frequency(Mhz)............: [102] C.I.A.2...............................: [Disabled] >>>>> Advanced Clock Control..........: [Press Enter] CPU Clock Drive.......................: [800mV] PCI Express Clock Drive...............: [900mV] CPU Clock Skew........................: [ 0ps] MCH Clock Skew........................: [ 0ps] ******** DRAM Performance Control ******** Performance Enhance...................: [Standard] Extreme Memory Profile(X.M.P.)........: [Disabled] (G)MCH Frequency Latch................: [Auto] System Memory Multiplier (SPD)........: [2.00D] Memory Frequency(Mhz).....800.........: 1080 DRAM Timing Selectable (SPD)..........: [Manual] >>>>> Standard Timing Control x CAS Latency Time................5...: [5] x tRCD ...........................5...: [ 5] x tRP.............................5...: [ 5] x tRAS...........................18...: [ 18] >>>>> Advanced Timing Control.........: [Press Enter] x tRRD............................3...: Auto x tWTR............................3...: Auto x tWR.............................6...: Auto x tRFC...........................52...: Auto x tRTP............................3...: Auto x Command Rate (CMD) .............0...: Auto >>>>> Channel A Timing Settings.......: [Press Enter] x Static tRead Value.............11...: [10] x tRD Phase0 Adjustment...........0...: Auto x tRD Phase1 Adjustment...........0...: Auto x tRD Phase2 Adjustment ..........0...: Auto x tRD Phase3 Adjustment...........0...: Auto x Trd2rd(Different Rank)..........6...: Auto x Twr2wr(Different Rank)..........6...: Auto x Twr2rd(Different Rank)..........5...: Auto x Trd2wr(Same/Diff Rank)..........8...: Auto x DIMM1 Clock Skew Control (ps).......: Auto x DIMM2 Clock Skew Control (ps).......: Auto x DDR Write Training..................: Auto >>>>> Channel A Driving Settings......: [Press Enter] x Driving Strength Profile............: [ 800Mhz] x Data Driving Pull-Up Level..........: Auto x Cmd Driving Pull-Up level...........: Auto x Ctrl Driving Pull-Up Level..........: Auto x Clk Driving Pull-Up Level...........: Auto x Data Driving Pull-Down Level........: Auto x Cmd Driving Pull-Down level.........: Auto x Ctrl Driving Pull-Down Level........: Auto x Clk Driving Pull-Down Level.........: Auto >>>>> Channel B Timing Settings.......: [Press Enter] x Static tRead Value.............11...: [10] x tRD Phase0 Adjustment...........0...: Auto x tRD Phase1 Adjustment...........0...: Auto x tRD Phase2 Adjustment ..........0...: Auto x tRD Phase3 Adjustment...........0...: Auto x Trd2rd(Different Rank)..........6...: Auto x Twr2wr(Different Rank)..........6...: Auto x Twr2rd(Different Rank)..........5...: Auto x Trd2wr(Same/Diff Rank)..........8...: Auto x DIMM1 Clock Skew Control (ps).......: Auto x DIMM2 Clock Skew Control (ps).......: Auto x DDR Write Training..................: Auto >>>>> Channel B Driving Settings......: [Press Enter] x Driving Strength Profile............: [ 800Mhz] x Data Driving Pull-Up Level..........: Auto x Cmd Driving Pull-Up level...........: Auto x Ctrl Driving Pull-Up Level..........: Auto x Clk Driving Pull-Up Level...........: Auto x Data Driving Pull-Down Level........: Auto x Cmd Driving Pull-Down level.........: Auto x Ctrl Driving Pull-Down Level........: Auto x Clk Driving Pull-Down Level.........: Auto ****** Motherboard Voltage Control ****** Voltage Types..........Normal...........Current ----------------------------------------------- >>> CPU Load-Line Calibration.................: [Disabled] CPU Vcore..............1.27500V.......: [1.42500V] CPU Termination........1.200V.........: [1.360V] CPU PLL................1.500V.........: [1.570V] CPU Reference..........0.760V.........: [0.901V] (0.800V with CPU Termination @ 1.200V / +2 steps) >>> MCH/ICH MCH Core...............1.100V.........: [1.320V] MCH Reference..........0.760V.........: [0.821V] (0.720V with CPU Termination @ 1.200V / -2 steps) MCH/DRAM Reference.....0.900V.........: [Normal] ICH I/O................1.500V.........: [Normal] ICH Core...............1.100V.........: [Normal] >>> DRAM DRAM Voltage...........1.800V.........: [2.020V] DRAM Termination.......0.900V.........: [Normal] Channel A Reference....0.900V.........: [Normal] Channel B Reference....0.900V.........: [Normal] ******** Advanced BIOS Features ******** Hard Disk Boot Priority...............: [Press Enter] First Boot Device.....................: [USB-HDD] Second Boot Device....................: [Hard Disk] Third Boot Device.....................: [CDROM] Password Check........................: [Setup] HDD S.M.A.R.T. Capability.............: [Enabled] Limit CPUID Max. to 3.................: [Disabled] No-Execute Memory Protect.............: [Enabled] CPU Enhanced Halt (C1E)...............: [Disabled] C2/C2E State Support..................: [Disabled] x C4/C4E State Support................: Disabled CPU Thermal Monitor 2(TM2) ...........: [Enabled] CPU EIST Function.....................: [Disabled] Virtualization Technology.............: [Disabled] Delay For HDD (Secs)..................: [ 0] Full Screen LOGO Show.................: [Disabled] Init Display First....................: [PEG] ******** Integrated Peripherals ******** USB Keyboard Function.................: [Enabled] USB Mouse Function....................: [Enabled] USB Storage Function..................: [Disabled]
Q9650 @ 4.10GHz [9x456MHz] P35-DS4 [rev: 2.0] ~ Bios: F14 4x2GB OCZ Reaper PC2-8500 1094MHz @5-5-5-15 MSI N460GTX Hawk Talon Attack (1GB) video card <---- SLI ----> Seasonic SS-660XP2 80 Plus Platinum psu (660w) WD Caviar Black WD6401AALS 640GB (data) Samsung 840 Pro 256GB SSD (boot) SLI @ 16/4 works when running HyperSLI |
Cooler Master 120XL Seidon push/pull AIO cpu water cooling Cooler Master HAF XB computer case (RC-902XB-KKN1) Asus VH242H 24" monitor [1920x1080] MSI N460GTX Hawk (1GB) video card Logitech Z-5500 Digital 5.1 Speakers win7 x64 sp1 Home Premium HT|Omega Claro plus+ sound card CyberPower CP1500PFCLCD UPS |
Comment