If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
CPU Clock ratio: 9
CPU Host Clock Control Enabled
CPU Hot Freq: 333
PCI Express Freq: 100
CIA2 : Disabled
DRAM Performance:
Performance Enhance: Standard
MCH Freq Latch: 333
System memory Multiplier: 2.40B
Mem freq: 800Mhz
CAS Latency: 5
tRCD: 4
tRP: 4
tRAS: 18
(Above mem settings per OCZ website)
CPU Vcore: 1.3250V
EVeryting else: Auto
DRAM Voltage: 2.100V (per manufactures)
I really would like to know if it's possible to runthis thing at 3Ghz
Thanks
Rob http://www.robertocerini.com i7 920 @ 3.40GHz ASUS P6T Deluxe V2 Antec P180 Case Antec True Power PSU (650w) Windows 7 Professional 64bit
FSB 425 Multiplier 8
Cpu clock drive 800mv PCI-E 900mv
V.Core 1.47500v (This mobo V.Droop like hell!)
CPU PLL 1.57v
CPU Termination 1.30v
MCH Core 1.26v
V.Dimm 2.22v, my sticks is running at 1133Mhz@5,5,5,15
Memory Latch at 400Mhz, Multiplier at 2.66D, XMP is set to Profile 2, the only one available.
Right now i don't recall if i set something else different, many options remain at Auto.
Bios F11C, you should consider to flash your bios with this version, it's stable, and i made a long post regarding it in Gigabyte Latest Bios thread.
8GB you may or may not get to run with OCZ Spec timings, those are for 4GB Set only so you may have to use 555-15 or 555-18. I do know for sure you should set/add some MCH Voltage for 4GB+, you may need 1.24-1.3
If you need some full suggested settings let me know and I can post you some ranges to work with
Comment