If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
What version of AHCI and RAID ROMs are in EX58-UD4P F9b bios? Also will updating require me to reinstall everything? I am running a RAID 0 setup on the Intel ICH10R chipset...
What version of AHCI and RAID ROMs are in EX58-UD4P F9b bios? Also will updating require me to reinstall everything? I am running a RAID 0 setup on the Intel ICH10R chipset...
it is 1.20E, detecting HDD is very fast about 5 sec
I was using IDE mode, changing to AHCI, I needed to reinstall windows
Anyone have a RAID array already and tried upgrading? Will I need to reinstall?
Nope, all will be fine. All you need to do is be sure you set your disk settings back to raid after the flash, reboot and set your raid to the first disk in the boot order and you will be good to go.
I posted tips on this process in the Qflash guide, if the image is gone please let me know thanks! (Used a image to show text due to character limits)
Comment