EP43-DS3L+E8400 to 3.7GHz {+Help} (Stable at 3.6GHz thanks to you guys

[IRoHellsing]

Sup guys, I am here once again to ask for help to increase my overclock just a little bit, 4months ago you guys helped me to set my E8400 stable at 3.6Ghz and a few days ago i've bought 2 new sticks of memory Corsair Dominator DDR2 1066Mhz (Sold the old Kingston DDR2 800Mhz) and now i want just to get Stable at 3.7Ghz w/ my E8400 and 1100Mhz w/ the memory.

Detailed information about my computer:

Intel Core2Duo E8400 C0 @ 3.6GHz {400x9} 1.26850v + Cooler Extream Ice Cube SF-901 w/ Artic Silver 5
Motherboard Gigabyte GA-EP43-DS3L @ F9C
2x 2GB Corsair Dominator DDR2 1066Mhz [5-5-5-15 2T] 2.1v {400x2.66D}
4,25TB Storage
Powercolor ATI HD4850 PCS+ 1GB DDR3 700/1960
PSU Corsair 450VX
Case Elegance [3x 80mm + 3x 92mm + 3x 120mm]

I just want 3.6 to 3.72 and memory 1066 to 1100mhz but i'm almost giving up :(

OC config and in bold is what i tried with no sucess...
Stress Tests ran:
OCCT 3.1.0
2x LINPACK [Auto] w/o errors.
2x OCCT [Auto] w/o errors.
Prime95 25.8 2 hours with small FFTs no errors
Orthos overnight BLEND test... error after 2 hours...

Maybe its because of my motherboard... (1.600FSB with OC) and it's already 1.652FSB
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto
CPU Clock Ratio ..........................: x9
Fine CPU Clock Ratio.....................:.0
CPU Frequency ...........................: 3600Mhz to 3717Mhz


Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 400Mhz to 413Mhz
PCI Express Frequency (Mhz) .........: 100Mhz


Advanced Clock Control [Press Enter]
CPU Clock Drive..........................: 800mV
PCI Express Clock Drive................: 900mV
CPU Clock Skew (ps)....................: 0ps
MCH Clock Skew (ps)....................: 0ps


DRAM Performance Control
Performance Enhance....................: [STANDARD]
Extreme Memory Profile (X.M.P.)........: [Disabled]
(G)MCH Frequency Latch.................: 400Mhz
System Memory Multiplier ...............: 2.66D
Memory Frequency (Mhz) ................: 1101Mhz
DRAM Timing Selectable ................: [Manual]

Standard Timing Control
CAS Latency Time........................ 5
tRCD ......................................... 5
tRP'........................................... 5
tRAS.......................................... 15

Advanced Timing Control
tRRD........................................... Auto
tWTR.......................................... Auto
tWR............................................ Auto
tRFC........................................... Auto
tRTP........................................... Auto
Command Rate (CMD) ....................: 2

Channel A
Static tRead Value.........................:Auto
tRD Phase0 Adjustment...................:Auto
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps

Channel B
Static tRead Value.........................: Auto
tRD Phase0 Adjustment...................:Auto
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
tRD Phase3 Adjustment..................:Auto
Trd2rd(Different Rank)....................:Auto
Twr2wr(Different Rank)...................:Auto
Twr2rd(Different Rank)...................:Auto
Trd2wr(Same/Diff Rank)..................:Auto
Dimm1 Clock Skew Control...............:Auto ps
Dimm2 Clock Skew Control...............:Auto ps

Motherboard Voltage Control

CPU Vcore….……….....: 1.30000v
CPU Termination….....: 1.300v
CPU PLL…………………...: 1.550v Auto
CPU Referen.…………...: 0.805v Auto

MCH/ICH
MCH Core................: 1.300v
ICH I/O.................: Auto

DRAM
DRAM Voltage ……....: 2.1v

Advanced Settings
Limit CPUID Max. to 3.....................: [Disabled]
No-Execute Memory Protect............: [Enabled]
CPU Enhanced Halt (C1E)................: [Disabled]
C2/C2E State Support....................: [Disabled]
x C4/C4E State Support..................: [Disabled]
CPU Thermal Monitor 2(TM2) ...........: [Enabled]
CPU EIST Function.........................: [Disabled]
Virtualization Technology................: [Enabled]

Infos w/ Everest Ultimate Edition 5.01

Temperatures w/ over at 3.6GHz:



Infos w/ CPUZ:



Core Voltage w/ Vdroop = 1.248v ~ 1.264v



Thank you all for the help!

Lsdmeasap help me!!!

[ghost707]

Re: EP43-DS3L+E8400 to 3.7GHz {+Help} (Stable at 3.6GHz thanks to you guys

Let me see if I can get some correct suggestions going here before the real gurus arrive,

CPU termination seems too high, and you may not need that much MCH core either.
You will need to manually set ALL your ram timings as well.