Re: System Freezes on Windows Logo
Help me help you. I am not sure what all you've done but I think its best you start over. 1st reset your comos, then back into the bios choose load optimized defaults. Then reboot back into Bios and select Intregrated Peripherials and set up this screen as you require. Reboot back into bios ans set up as you require, Advanced Bios Fetures, Standard Bios fetures and PC Health Status. I am not faimilure with your board so you have to tell me what settings you have or do not have. After you make you adjustments hit F11 to save the current bios. Name it basic or something you like.
Then boot back into bios and make the changes below. After changes are made Hit F11 again and save it as basic again just over write it. Then boot into windows and see what you get. Also add remove any setting you have in your bios in the below template.
Help me help you. I am not sure what all you've done but I think its best you start over. 1st reset your comos, then back into the bios choose load optimized defaults. Then reboot back into Bios and select Intregrated Peripherials and set up this screen as you require. Reboot back into bios ans set up as you require, Advanced Bios Fetures, Standard Bios fetures and PC Health Status. I am not faimilure with your board so you have to tell me what settings you have or do not have. After you make you adjustments hit F11 to save the current bios. Name it basic or something you like.
Then boot back into bios and make the changes below. After changes are made Hit F11 again and save it as basic again just over write it. Then boot into windows and see what you get. Also add remove any setting you have in your bios in the below template.
Code:
MB Intelligent Tweaker(M.I.T.) Robust Graphics Booster ...............: Auto CPU Clock Ratio.............................: 8 x Fine CPU Clock Ratio.....................:.+0.5 CPU Frequency ...........................: 2.83GHz Clock Chip Control Standard Clock Control CPU Host Clock Control..................: [Disabled] CPU Host Frequency (Mhz) ............: 333 Mhz PCI Express Frequency (Mhz) .........:Auto [COLOR=red]<<< 100[/COLOR] Advanced Clock Control [Press Enter] CPU Clock Drive...........................: <<< 800 PCI Express Clock Drive.................: <<< 800 CPU Clock Skew (ps)....................: <<< 0 MCH Clock Skew (ps)...................: <<< 0 DRAM Performance Control Performance Enhance...................: [STANDARD] (G)MCH Frequency Latch...............: [Auto] System Memory Multiplier ..............: [Auto] Memory Frequency (Mhz) ..............: 800 DRAM Timing Selectable ................: [Auto] Standard Timing Control CAS Latency Time........................5 tRCD .........................................5 tRP'...........................................5 tRAS..........................................18 Advanced Timing Control tRRD...........................................Auto tWTR..........................................Auto tWR............................................Auto tRFC...........................................Auto tRTP...........................................Auto Command Rate (CMD) ....................:Auto Channel A Static tRead Value.........................:Auto tRD Phase0 Adjustment...................:Auto tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps Channel B Static tRead Value.........................:Auto tRD Phase0 Adjustment...................:Auto tRD Phase1 Adjustment...................:Auto tRD Phase2 Adjustment .................:Auto tRD Phase3 Adjustment..................:Auto Trd2rd(Different Rank)....................:Auto Twr2wr(Different Rank)...................:Auto Twr2rd(Different Rank)...................:Auto Trd2wr(Same/Diff Rank)..................:Auto Dimm1 Clock Skew Control...............:Auto ps Dimm2 Clock Skew Control...............:Auto ps Motherboard Voltage Control CPU CPU Vcore�.���.........................:Auto [COLOR=red]<<< default voltage here[/color] CPU Termination�..... 1.200V ...........:Auto CPU Referen.����....0.820V*.......:Auto [COLOR=red]IS this all you have for CPU settings?[/COLOR] MCH/ICH MCH Core�����.....1.200V...........: Auto [COLOR=red]Is this all you have for MCH Settings?[/COLOR] DRAM DRAM Voltage ��....1.800V............: auto <<< 1.9V [COLOR=red]Is this all you have for Dram settings?[/COLOR]
Comment