So I have a q9550 and a ga-ep45-dq6 and f13d bios that won't s3 sleep. S1 works fine. 12 hr prime 95 stable. 100 run lin pack stable. Temps great. Never bsoded. Never crashed in game. Perfect chip outsite of s3 sleep not working above 410mhz fsb. Quite sure its gigabyte's screwup, but a certain someone believes otherwise. Below are my settings. Maybe there's something you see thats off. I don't see anything. My system is perfectly stable :( Would like a work around. If not, for sure next board an asus or MSI because no s3 sleep is quite lousy indeed.
I've tried everything btw from pretty much every windows sleep fix to every bios available on the gigabyte website and every possible configuration that makes any sort of sense. Nothing works. I also had a ga-ep45-ds3r with the same problem and despite switching board, psu, chip, ram, and video card at some point or other the problem is exactly the same. How is it that two p45 boards have the exact same problem despite difference configs between the two of them?
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto
CPU Clock Ratio ..........................: 8
Fine CPU Clock Ratio.....................:.0.5
CPU Frequency ...........................: 4ghz
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 471 Mhz
PCI Express Frequency (Mhz) .........:Set to 100
C.I.A.2 .................................:[Disabled]
Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: <<< 800
PCI Express Clock Drive.................: <<< 900
CPU Clock Skew (ps)....................: <<< auto
MCH Clock Skew (ps)...................: <<< auto
DRAM Performance Control
Performance Enhance...................: [STANDARD]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: 400mhz
System Memory Multiplier ..............: 2.00B
Memory Frequency (Mhz) ..............: 471 x 2
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time........................5
tRCD .........................................5
tRP'...........................................5
tRAS..........................................12
Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go
Advanced Timing Control
tRRD...........................................aut o
tWTR.......................................... auto
tWR............................................ auto
tRFC........................................... auto
tRTP........................................... auto
Command Rate (CMD) ....................:2
Driving Strength Profiles
Driving Strength ............................ auto
Channel A
Static tRead Value.........................: auto
tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
I've tried everything btw from pretty much every windows sleep fix to every bios available on the gigabyte website and every possible configuration that makes any sort of sense. Nothing works. I also had a ga-ep45-ds3r with the same problem and despite switching board, psu, chip, ram, and video card at some point or other the problem is exactly the same. How is it that two p45 boards have the exact same problem despite difference configs between the two of them?
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster ...............: Auto
CPU Clock Ratio ..........................: 8
Fine CPU Clock Ratio.....................:.0.5
CPU Frequency ...........................: 4ghz
Clock Chip Control
Standard Clock Control
CPU Host Clock Control..................: [Enabled]
CPU Host Frequency (Mhz) ............: 471 Mhz
PCI Express Frequency (Mhz) .........:Set to 100
C.I.A.2 .................................:[Disabled]
Advanced Clock Control [Press Enter]
CPU Clock Drive...........................: <<< 800
PCI Express Clock Drive.................: <<< 900
CPU Clock Skew (ps)....................: <<< auto
MCH Clock Skew (ps)...................: <<< auto
DRAM Performance Control
Performance Enhance...................: [STANDARD]
Extreme Memory Profile (X.M.P.).....: Disabled
(G)MCH Frequency Latch...............: 400mhz
System Memory Multiplier ..............: 2.00B
Memory Frequency (Mhz) ..............: 471 x 2
DRAM Timing Selectable ................: [Manual]
Standard Timing Control
CAS Latency Time........................5
tRCD .........................................5
tRP'...........................................5
tRAS..........................................12
Set all Suggested below to highest Values first. Then later you can lower, one at a time, testing as you go
Advanced Timing Control
tRRD...........................................aut o
tWTR.......................................... auto
tWR............................................ auto
tRFC........................................... auto
tRTP........................................... auto
Command Rate (CMD) ....................:2
Driving Strength Profiles
Driving Strength ............................ auto
Channel A
Static tRead Value.........................: auto
tRD Phase0 Adjustment...................:Auto <<< Leave for all below as well
tRD Phase1 Adjustment...................:Auto
tRD Phase2 Adjustment .................:Auto
Comment