I recently upgraded to i7 and i am stuck with what i am doing wrong.
Below is the highest i tried for last night (still on stock cooling)
memory multiplier = 8
uncore frequency = 16
QPI link speed = 36
![](http://i46.tinypic.com/20szrc5.jpg)
All of my specs are in my signature and the voltages are in the SS. Now after running this i decided to go back to 3.4Ghz and increase my ram a little and that is where the fun started.
I changed the memory multiplier to 10, uncore frequency to 20 then tried 21 then tried 22 with no luck and i had QPI link speed to 36 with al of theses settings.
The way i understood it is that the Uncore Frequency must always be at least 2x memory multi.
I even tried 3.2Ghz with higher memory with no luck.
Can anyone point out where i am going wrong?
I will include a bios template later. Thanks for your time.
Below is the highest i tried for last night (still on stock cooling)
memory multiplier = 8
uncore frequency = 16
QPI link speed = 36
![](http://i46.tinypic.com/20szrc5.jpg)
All of my specs are in my signature and the voltages are in the SS. Now after running this i decided to go back to 3.4Ghz and increase my ram a little and that is where the fun started.
I changed the memory multiplier to 10, uncore frequency to 20 then tried 21 then tried 22 with no luck and i had QPI link speed to 36 with al of theses settings.
The way i understood it is that the Uncore Frequency must always be at least 2x memory multi.
I even tried 3.2Ghz with higher memory with no luck.
Can anyone point out where i am going wrong?
I will include a bios template later. Thanks for your time.
Comment