computer specs:
MB Gigabyte GA-790FXTA-UD5
8Gb DDR3 OCZ 1333mhz
AMD Phenom II 955 3.2GHz
Sapphire 5450 1 Gb DDR2
Pioneer BDR-205BK blueray
Thermaltake TR2 RX 650w
Thermaltake element S case 3x 23cms fan
Build this computer last weeck, everything was fine but installing OS Windows 7 64 bits, suddendly shuts down, the power led was on, but fans, cpu fan, HDD, everything went off, the power, reset and bios leds in the motherboards stayed on and pressing the power button nothing happened, so i disconnected de power cable and reconect it and pressing the power button again everything went normal, i didnt liked windows 7 so i decided to install windows xp 64 bit and same thing happened during installation, it went off again, i started over the installation and finished it well. Correctly installed aplications like adobe cs4, office, antivirus, etc, then connect my older 500Gb HDD(1 year used), started up and when windows started the computer again shut it down again whit the leds on even the motherboard leds, no display image like if the computer were off just leds on, again pulled off the power cable and reconnect it, and again goes normal. I checked the temperature in every case, after rebooting and was CPU 50c system 43c today launch adobe premiere cs4 and system hangs, it happended 3 times today,so what it could be and how to fix it
MB Gigabyte GA-790FXTA-UD5
8Gb DDR3 OCZ 1333mhz
AMD Phenom II 955 3.2GHz
Sapphire 5450 1 Gb DDR2
Pioneer BDR-205BK blueray
Thermaltake TR2 RX 650w
Thermaltake element S case 3x 23cms fan
Build this computer last weeck, everything was fine but installing OS Windows 7 64 bits, suddendly shuts down, the power led was on, but fans, cpu fan, HDD, everything went off, the power, reset and bios leds in the motherboards stayed on and pressing the power button nothing happened, so i disconnected de power cable and reconect it and pressing the power button again everything went normal, i didnt liked windows 7 so i decided to install windows xp 64 bit and same thing happened during installation, it went off again, i started over the installation and finished it well. Correctly installed aplications like adobe cs4, office, antivirus, etc, then connect my older 500Gb HDD(1 year used), started up and when windows started the computer again shut it down again whit the leds on even the motherboard leds, no display image like if the computer were off just leds on, again pulled off the power cable and reconnect it, and again goes normal. I checked the temperature in every case, after rebooting and was CPU 50c system 43c today launch adobe premiere cs4 and system hangs, it happended 3 times today,so what it could be and how to fix it
Comment