OVERCLOCK HELP: Gigabyte UD3R i7 930 - Patriot 3x 2GB 1600 MHz

[VodkaPlease]

hi guys!! this is my first i7 oc..so please help me with my i7 930! i'd really appreciate it.
my target OC is 4.5 GHZ 24/7


My system:


CPU: Intel i7 930

Cooling: Noctua nh-d14

Mobo: Gigabyte GA-X58A-UD3R (rev FA)

Memory: DDR III 1600Mhz - 3x2GB Patriot Extreme Performance Triple Channel model PVT36G1600LLK xtreme Performance PC3-12800 (1600MHz)

GPU: GTX 460 1 GB GIGABYTE SLI 2X

HDDs: 1TB 7200RPM 32MB, Sata II HD103SJ

PSU: Cooler Master HAF 932 Full tower

If you can give me stable settings for 4.5 if you can i will appreciate that alot thanks again.

[wazza300]

Re: OVERCLOCK HELP: Gigabyte UD3R i7 930 - Patriot 3x 2GB 1600 MHz

you wont clock to 4.5ghz on air,you need water for that,grab and download my 4.2ghz template if you wanna try that,best try a 21x200 instead of a 22x cpu multi as it will be more stable and use less voltage,if you need anymore help then post back

[VodkaPlease]

Re: OVERCLOCK HELP: Gigabyte UD3R i7 930 - Patriot 3x 2GB 1600 MHz

you wont clock to 4.5ghz on air,you need water for that,grab and download my 4.2ghz template if you wanna try that,best try a 21x200 instead of a 22x cpu multi as it will be more stable and use less voltage,if you need anymore help then post back

Ok than i am fine with 4.2 can you build those settings for my motherboard please?
but stable settings if you can
thanks

edit:btw im using you settings but i have one problem i cant disable the Load Line Calibration..
i got 3 options
auto
level 1
level 2

[wazza300]

Re: OVERCLOCK HELP: Gigabyte UD3R i7 930 - Patriot 3x 2GB 1600 MHz

you should have an option to disable it


Code:
Advanced CPU Features:
CPU Clock Ratio ............................. [21x]
DP Frequency ................................ 4.20GHz (200x21)
Intel(R) Turbo Boost Tech ................... [Enabled] disabled if you have 930 chip
CPU Cores Enabled ........................... [All]
CPU Multi Threading ......................... [Enabled]
CPU Enhanced Halt (C1E) ..................... [Disabled]
C3/C6/C7 State Support ...................... [enabled]
CPU Thermal Monitor ......................... [Enabled]
CPU EIST Function ........................... [enabled]
Virtualization Technology ................... [enabled]
Bi-Directional PROCHOT ...................... [Enabled]

Uncore & QPI Features:
QPI Link Ratio .............................. [x36]
QPI Link Speed .............................. 7.xxGHz
Uncore Frequency ............................ [x17]
Isonchronous Frequency ...................... [Enabled]

Standard Clock Control:
Base Clock (BCLK) Control ................ [Enabled]
BCLK Frequency (MHz) ..................... [200]
PCI Express Frequency (MHz) .............. [100]


Advanced Clock Control:
CPU Clock Drive ............................ [800mV]
PCI Express Clock Drive .................... [900mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]

Advanced DRAM Features:
Performance Enhance .................... [Standard]
Extreme Memory Profile (X.M.P) ......... [Disabled] --> Disable XMP and manually adjust your ram latencies
System Memory Multiplier (SPD) ........ [8.0]set to this to give you 1600mhz ram speed
Memory Frequency (Mhz) ................ 1600
DRAM Timing Selectable (SPD) .......... [Quick]
Profile DDR Voltage ................... xxxxV
Profile QPI Voltage ................... xxxxV
Channel Interleaving .................. [Auto]
Rank Interleaving ..................... [Auto]

Channel A + B + C

Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ........................... 8 [8]
tRCD ....................................... 8 [8]
tRP ........................................ 8 [8]
tRAS ....................................... 24 [24]



##Channel A Advanced Timing Control##
tRC ........................................ [Auto]
tRRD ....................................... [Auto]
tWTR ....................................... [Auto]
tWR ........................................ [Auto]
tWTP ....................................... [Auto]
tWL ........................................ [Auto]
tRFC ....................................... [Auto]
tRTP ....................................... [Auto]
tFAW ....................................... [Auto]
Command Rate (CMD) ......................... [Auto]

##Channel A Misc Timing Control##
B2B CAS Delay .............................. [Auto]
Round Trip Latency ......................... [Auto]

Advanced Voltage Control:

CPU
Load Line Calibration ...................... [disabled]
CPU Vcore .......................... 1.2375V [normal] look for dvid in bios and set to +0.0750v
QPI/VTT Voltage .................... 1.175V [1.315V]
CPU PLL ............................ 1.800V [auto]

MCH/ICH
PCIE .............................. 1.500v [auto]
QPI PLL ........................... 1.100v [auto]
IOH Core ........................... 1.100v [auto]
ICH I/O ............................ 1.500v [auto]
ICH Core ........................... 1.100v [auto]

DRAM
DRAM Voltage ....................... 1.500V [1.660V]
DRAM Termination ................... 0.750v [AUTO]
Ch-A Data VRef. .................... 0.750v [AUTO]
Ch-B Data VRef. .................... 0.750v [AUTO]
Ch-C Data VRef. .................... 0.750v [AUTO]
Ch-A Address VRef. ................. 0.750v [AUTO]
Ch-B Address VRef. ................. 0.750v [AUTO]
Ch-C Address VRef. ................. 0.750v [AUTO]


you may need to tweak qpi/vtt voltage a little

[paulselhi]

Re: OVERCLOCK HELP: Gigabyte UD3R i7 930 - Patriot 3x 2GB 1600 MHz

standard setting is LLC off

[VodkaPlease]

Re: OVERCLOCK HELP: Gigabyte UD3R i7 930 - Patriot 3x 2GB 1600 MHz

you should have an option to disable it


Code:
Advanced CPU Features:
CPU Clock Ratio ............................. [21x]
DP Frequency ................................ 4.20GHz (200x21)
Intel(R) Turbo Boost Tech ................... [Enabled] disabled if you have 930 chip
CPU Cores Enabled ........................... [All]
CPU Multi Threading ......................... [Enabled]
CPU Enhanced Halt (C1E) ..................... [Disabled]
C3/C6/C7 State Support ...................... [enabled]
CPU Thermal Monitor ......................... [Enabled]
CPU EIST Function ........................... [enabled]
Virtualization Technology ................... [enabled]
Bi-Directional PROCHOT ...................... [Enabled]

Uncore & QPI Features:
QPI Link Ratio .............................. [x36]
QPI Link Speed .............................. 7.xxGHz
Uncore Frequency ............................ [x17]
Isonchronous Frequency ...................... [Enabled]

Standard Clock Control:
Base Clock (BCLK) Control ................ [Enabled]
BCLK Frequency (MHz) ..................... [200]
PCI Express Frequency (MHz) .............. [100]


Advanced Clock Control:
CPU Clock Drive ............................ [800mV]
PCI Express Clock Drive .................... [900mV]
CPU Clock Skew ............................. [0ps]
IOH Clock Skew ............................. [0ps]

Advanced DRAM Features:
Performance Enhance .................... [Standard]
Extreme Memory Profile (X.M.P) ......... [Disabled] --> Disable XMP and manually adjust your ram latencies
System Memory Multiplier (SPD) ........ [8.0]set to this to give you 1600mhz ram speed
Memory Frequency (Mhz) ................ 1600
DRAM Timing Selectable (SPD) .......... [Quick]
Profile DDR Voltage ................... xxxxV
Profile QPI Voltage ................... xxxxV
Channel Interleaving .................. [Auto]
Rank Interleaving ..................... [Auto]

Channel A + B + C

Channel A Timing Settings:
##Channel A Standard Timing Control##
CAS Latency Time ........................... 8 [8]
tRCD ....................................... 8 [8]
tRP ........................................ 8 [8]
tRAS ....................................... 24 [24]



##Channel A Advanced Timing Control##
tRC ........................................ [Auto]
tRRD ....................................... [Auto]
tWTR ....................................... [Auto]
tWR ........................................ [Auto]
tWTP ....................................... [Auto]
tWL ........................................ [Auto]
tRFC ....................................... [Auto]
tRTP ....................................... [Auto]
tFAW ....................................... [Auto]
Command Rate (CMD) ......................... [Auto]

##Channel A Misc Timing Control##
B2B CAS Delay .............................. [Auto]
Round Trip Latency ......................... [Auto]

Advanced Voltage Control:

CPU
Load Line Calibration ...................... [disabled]
CPU Vcore .......................... 1.2375V [normal] look for dvid in bios and set to +0.0750v
QPI/VTT Voltage .................... 1.175V [1.315V]
CPU PLL ............................ 1.800V [auto]

MCH/ICH
PCIE .............................. 1.500v [auto]
QPI PLL ........................... 1.100v [auto]
IOH Core ........................... 1.100v [auto]
ICH I/O ............................ 1.500v [auto]
ICH Core ........................... 1.100v [auto]

DRAM
DRAM Voltage ....................... 1.500V [1.660V]
DRAM Termination ................... 0.750v [AUTO]
Ch-A Data VRef. .................... 0.750v [AUTO]
Ch-B Data VRef. .................... 0.750v [AUTO]
Ch-C Data VRef. .................... 0.750v [AUTO]
Ch-A Address VRef. ................. 0.750v [AUTO]
Ch-B Address VRef. ................. 0.750v [AUTO]
Ch-C Address VRef. ................. 0.750v [AUTO]


you may need to tweak qpi/vtt voltage a little

no i cant..heres a screeie:


and the dvid i cant edit...its in grey i dont know why

http://i36.tinypic.com/eqa14k.jpg

standard setting is LLC off

what?

[paulselhi]

Re: OVERCLOCK HELP: Gigabyte UD3R i7 930 - Patriot 3x 2GB 1600 MHz

to disable LLC leave it at standard
to enable dvid set cpu voltage to normal

[VodkaPlease]

Re: OVERCLOCK HELP: Gigabyte UD3R i7 930 - Patriot 3x 2GB 1600 MHz

to disable LLC leave it at standard
to enable dvid set cpu voltage to normal

Oh ok thanks !!
But one more question he said that i need to set DRAM Timing Selectable to Quick.
DRAM Timing Selectable (SPD) .......... [Quick]
and than edit em all memory channels to 8 8 8 24
but i cant it only allows me edit only 1 channel to 8 8 8 24

[paulselhi]

Re: OVERCLOCK HELP: Gigabyte UD3R i7 930 - Patriot 3x 2GB 1600 MHz

quick does all 3 chanels, expert alows each individually

[VodkaPlease]

Re: OVERCLOCK HELP: Gigabyte UD3R i7 930 - Patriot 3x 2GB 1600 MHz

quick does all 3 chanels, expert alows each individually

Oh ok i did his setting and disabled those things:

Intel(R) Turbo Boost Tech ................... [Enabled] disabled if you have 930 chip
CPU Cores Enabled ........................... [All]
CPU Multi Threading ......................... [Enabled]
CPU Enhanced Halt (C1E) ..................... [Disabled]
C3/C6/C7 State Support ...................... [Disabled]
CPU Thermal Monitor ......................... [Enabled]
CPU EIST Function ........................... [Disabled]
Bi-Directional PROCHOT ...................... [Enabled]

i tried the OCCT test and my pc crashed.....
why?
Paulselhi may i have your qpi/vtt voltage setting?ty
My correct settings:

[wazza300]

Re: OVERCLOCK HELP: Gigabyte UD3R i7 930 - Patriot 3x 2GB 1600 MHz

you might be using too much cpu voltage,1.22500v should be anough for 4.2ghz so try with dvid set to its normal setting,you can enable all the c-states except for c1e keep that disabled, every cpu/mb will be different for example my chip needs/uses 1.18750v on normal setting so you will need to tweak things a little

[VodkaPlease]

Re: OVERCLOCK HELP: Gigabyte UD3R i7 930 - Patriot 3x 2GB 1600 MHz

you might be using too much cpu voltage,1.22500v should be anough for 4.2ghz so try with dvid set to its normal setting,you can enable all the c-states except for c1e keep that disabled, every cpu/mb will be different for example my chip needs/uses 1.18750v on normal setting so you will need to tweak things a little

I dont get it...my Cpu Vcore is now on normal..and dvid is +07500v.
What do i need to set up that it will be stable?I am sorry but my english is bad.
Can you tell me extract what i need to set up

[paulselhi]

Re: OVERCLOCK HELP: Gigabyte UD3R i7 930 - Patriot 3x 2GB 1600 MHz

Try this, note i am runing 12 GB RAM and these settings run hot, i am working on them at the moment but it is stable though will get hot in Prime
my CPU needs a lot of volts with 12 GB RAM you should be able to lower the settings once you check that you are satble. Especially the QPI-VTT as you only have 6 GB RAM

I7 930
Gigabyte EX58A=UD3R Rev 1 Bios F5
12 GB Corsair 1600 Rated 9-9-9-04-2T 1.65V
Noctua NH-D14 with Noctua TIM
Xclio Windtunnel Case
650W Corsair CMPSU-650TX, single 12

CPU Clock Ratio – 21

Advanced CPU Features:-
CPU Clock Ratio - 21
Intel (R) Turbo Boost Tech. -disabled
CPU Cores Enabled - enabled
CPU Multi-Threading - enabled
CPU Enhanced Halt (C1E) -disabled
C3/C6/C7 State Support -disabled
CPU Thermal Monitor - disabled
CPU EIST Function - disabled
Virtualization Technology - disabled
Bi-Directional PROCHOT - enabled

QPI Link Speed - 7.2 Ghz

Uncore & QPI Features:-
QPI Link Speed - X 36
Uncore Frequency - 3400 ( X 17)
Isochronous Support - Enabled

Base Clock (BCLK) Control -
BCLK Frequency (Mhz) - 200

Advanced Clock Control:-
Base Clock (BCLK) Control - Enabled
BCLK Frequency (Mhz) - 200
PCI Express Frequency (Mhz) - 101
C.I.A.2 - not applicable
CPU Clock Drive - 800
PCI Express Clock Drive -900
CPU Clock Skew - 0
IOH Clock Skew - 0

Performance Enhance - standard
Extreme Memory Profile (X.M.P.) - Disabled
System Memory Multiplier (SPD) - 8.0 1600Mhz
DRAM Timing Schedule (SPD) - [Expert]

**The following 5 options need setting for each stick of ram**
CAS Latency Time - 9
tRCD - 9
tRP - 9
tRAS - 24
Command Rate (CMD) - 2

Load-Line Calibration - Level 1
CPU Vcore - 1.44375
QPI/Vtt Voltage - 1.395
IOH Core - 1.2
DRAM Voltage - 1.68

Advanced Voltage Control:-
Load-Line Calibration - Level 1
CPU Vcore - 1.44375
QPI/Vtt Voltage - 1.395
CPU PLL - 1.80
PCIE - 1.50
QPI PLL - 1.20
IOH Core - 1.20
ICH I/O - 1.50
ICH Core - 1.20
DRAM Voltage - 1.68

Also if you are running 64 bit windows go into Power Management in the BIOS and set HPET to 64 bit

[wazza300]

Re: OVERCLOCK HELP: Gigabyte UD3R i7 930 - Patriot 3x 2GB 1600 MHz

I dont get it...my Cpu Vcore is now on normal..and dvid is +07500v.
What do i need to set up that it will be stable?I am sorry but my english is bad.
Can you tell me extract what i need to set up

put dvid to normal and try not with +0.0750,look in the list and select normal both for cpu and dvid

[VodkaPlease]

Re: OVERCLOCK HELP: Gigabyte UD3R i7 930 - Patriot 3x 2GB 1600 MHz

Ok im going to try this i also have 12 gb ram ^^