Announcement

Collapse
No announcement yet.

880GA-UD3H Issues

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    880GA-UD3H Issues

    I recently installed a 880GA-UD3H rev2.1 and for life of me can'get it to work. The main issue is I get no video signal coming from either outputs, also I don't if I install a PCIe vid card. Also, the internal speaker doesn't work or it's not even posting.

    I've tried new RAM (different slots) and even installed RAM I know works. I went as far as testing the 24pin connector and 8 pin connector with a power supply tester. They were fine.

    Someone said I need to flash the BIOS to F3 because I'm using an AMD Athlon II 245, but how do you flash the bios when nothing is working? I decided to RMA the board, but maybe I missed something.
    Tags: None
  • #2
    Re: 880GA-UD3H Issues

    F3 is the first release board BIOS, so you must have it or later.
    You have the 4/8pin ATX_12v power connected?
    What memor do you have? Try with one module only.

    Comment

    • #3
      Re: 880GA-UD3H Issues

      I do have it connected. Also, I've done only one memory module at a time in each slot.

      Comment

      • #4
        Re: 880GA-UD3H Issues

        Is it our the case, one more thing worth a shot. Do you have a speaker connected?
        Otherwise may be DOA and wouldn't be the first.

        Comment

        • #5
          Re: 880GA-UD3H Issues

          It was originally in a case, but I took out just in case it was shorting on something. No speaker is connected. I submitted a RMA to Gigabyte.

          Comment

          Previous template Next
          Working...
          X