i920 OC on X58A-UD7 running hot

[wazza300]

Re: i920 OC on X58A-UD7 running hot

Yes maybe its a typo but the first digit should always be 0 eg,+0. Otherwise you will overvolt the cpu by a huge amount

[k1llah3rtz]

Re: i920 OC on X58A-UD7 running hot

it was a typo, but the machine also wasn't table. after ten minutes on occt, i got an error on core #5.

[wazza300]

Re: i920 OC on X58A-UD7 running hot

it was a typo, but the machine also wasn't table. after ten minutes on occt, i got an error on core #5.

Was that with llc enabled?

[k1llah3rtz]

Re: i920 OC on X58A-UD7 running hot

no, llc was set to standard.

i've now given up again with using DVID as I can't get it stable or booting. I've now upped the QPI V. and vCore is set to 1.30625V.

Will now try for 4.2Ghz if OCCT runs without error for 15 minutes.

[k1llah3rtz]

Re: i920 OC on X58A-UD7 running hot

well that didn't work.. no stability. will post bios settings.

[wazza300]

Re: i920 OC on X58A-UD7 running hot

It can be difficult to get a high oc stable 4ghz+ with dvid

[Acebmxer]

Re: i920 OC on X58A-UD7 running hot

It can be difficult to get a high oc stable 4ghz+ with dvid

My old EX58-ud5 had issues booting past 200 bclk with dvid. New X58A-ud5 rev2 board hos no issues with dvid. Could be the board.