Tweet
EP35C-DS3R BIOS o/c not active
I have o/c'd the above mo/bo to run a FSB @400MHz and saved the BIOS settings.
The PC boots normally but using either system information or CPUZ the bus speed is shown as standard 333MHz.
Thinking the PC had reset the BIOS back to normal settings, although no double boot was detected, I checked again and the BIOS was still set to 400 FSB.
I should add that this is on friend's PC, which I built, I have the same rig and mine shows the o/c correctly in Windows.
Anyone have a solution to this odd problem?
TIA
Dave
The PC boots normally but using either system information or CPUZ the bus speed is shown as standard 333MHz.
Thinking the PC had reset the BIOS back to normal settings, although no double boot was detected, I checked again and the BIOS was still set to 400 FSB.
I should add that this is on friend's PC, which I built, I have the same rig and mine shows the o/c correctly in Windows.
Anyone have a solution to this odd problem?
TIA
Dave
Comment