Hello, i have been trying for several days to get this motherboard to get past post.
Tried resetting cmos
Boot without battery
Moving ram to other dimms 1 and 3, 2 and 4, ect...
Booting with no ram
Disconnecting Sata connectors
Using different ram
When i boot it beeps like normal but will not get past logo screen. I can't get into bios to change anything or view any post info as to what it is hanging on. Splash Screen was disabled before this issue happened but shows up and will not go beyond that point.
I am using a pentium d 945 processor until my core2quad 9550 comes back from intel. it died and had it replaced under warranty. this has been i on going issue with this board and getting past post.
Any answer would be greatly appreciated....
My specs are:
Pentium d 945 Preslar @3.40ghz
Gigabyte EP45- UD3P Revision 1.0 with Bios vF10
2x2gb G Skill DDR2 1200 (F2-9600CL5D-4GBPI)
Crucial 64gb M4 SSD
Palit GTS 450 Sonic
Corsair 650w PSU (TX Series)
Antec 300 Case
Thermolab Baram with Sythce Kama Flex mounted
The pc would boot and ran just fine but it has been doing this for 2 days was able to get past post into windows doing various methods as stated above but now nothing... Once again any answers would be appreciated..Thank You
Tried resetting cmos
Boot without battery
Moving ram to other dimms 1 and 3, 2 and 4, ect...
Booting with no ram
Disconnecting Sata connectors
Using different ram
When i boot it beeps like normal but will not get past logo screen. I can't get into bios to change anything or view any post info as to what it is hanging on. Splash Screen was disabled before this issue happened but shows up and will not go beyond that point.
I am using a pentium d 945 processor until my core2quad 9550 comes back from intel. it died and had it replaced under warranty. this has been i on going issue with this board and getting past post.
Any answer would be greatly appreciated....
My specs are:
Pentium d 945 Preslar @3.40ghz
Gigabyte EP45- UD3P Revision 1.0 with Bios vF10
2x2gb G Skill DDR2 1200 (F2-9600CL5D-4GBPI)
Crucial 64gb M4 SSD
Palit GTS 450 Sonic
Corsair 650w PSU (TX Series)
Antec 300 Case
Thermolab Baram with Sythce Kama Flex mounted
The pc would boot and ran just fine but it has been doing this for 2 days was able to get past post into windows doing various methods as stated above but now nothing... Once again any answers would be appreciated..Thank You
Comment