Hey guys
I recently built a new comp with 3570k and the D3H board.
It's working great but I am having a few problems.
My computer specs:
CPU: i5-3570k
Mobo: GA-Z77X-D3H - latest BIOS
RAM: 8GB(two 4gb sticks in dual channel config) Crucial Ballistix Tactical 1600 CL8
GPU: XFX 7950 Double D
System hard drive: Crucial M4 128GB - latest firmware
PSU: SeaSonic M12II 620 watts Bronze certified
Other stuff: Asus DVD-RW, D-link PCI wireless adapter, Seagate Barracuda hard drive for storage
Problems:
1. BSOD if the computer resumes from sleep mode
This only happens if the computer was in sleep mode for a long time. I don't know exactly how long but if it's shorter than 1 hour, the computer can resume without BSOD.
The mobo's BIOS is the most recent version.
I tried different graphics card and RAM. Didn't help.
2. Periodic ET6 crash
ET6, newest version, randomly crashes and closes itself multiple times per day. I am not even actively using the program when it happens.
Windows pops up a box saying that the program has encountered an error. Something about MFC application.
3. No voltage control for the sys_fan headers.
I have 3-pin case fans connected to the sys_fan headers on the motherboard and they are all running at max rpm. The motherboard doesn't seem to be controlling them by voltage. I checked BIOS settings to make sure fan control is enabled.
PWM fans are properly controlled.
I recently built a new comp with 3570k and the D3H board.
It's working great but I am having a few problems.
My computer specs:
CPU: i5-3570k
Mobo: GA-Z77X-D3H - latest BIOS
RAM: 8GB(two 4gb sticks in dual channel config) Crucial Ballistix Tactical 1600 CL8
GPU: XFX 7950 Double D
System hard drive: Crucial M4 128GB - latest firmware
PSU: SeaSonic M12II 620 watts Bronze certified
Other stuff: Asus DVD-RW, D-link PCI wireless adapter, Seagate Barracuda hard drive for storage
Problems:
1. BSOD if the computer resumes from sleep mode
This only happens if the computer was in sleep mode for a long time. I don't know exactly how long but if it's shorter than 1 hour, the computer can resume without BSOD.
The mobo's BIOS is the most recent version.
I tried different graphics card and RAM. Didn't help.
2. Periodic ET6 crash
ET6, newest version, randomly crashes and closes itself multiple times per day. I am not even actively using the program when it happens.
Windows pops up a box saying that the program has encountered an error. Something about MFC application.
3. No voltage control for the sys_fan headers.
I have 3-pin case fans connected to the sys_fan headers on the motherboard and they are all running at max rpm. The motherboard doesn't seem to be controlling them by voltage. I checked BIOS settings to make sure fan control is enabled.
PWM fans are properly controlled.
Comment