Tweet
I have a video card installed so this isn't a big deal but I wanted to check out the video on the board and it's not working. I installed the board on 12/1/12 - 12/2/12 and have looked in the device manager and I only see the drivers for the NVidia card. I became aware of this issue when I tried to install the Lucid Logix driver and it told me the Integrated Graphics Device was not found. Is there any way that I can fix this
-
CPU - Intel i5-3570k
Motherboard - Gigabyte GA-Z77X-UD3H
BIOS Version - F18
Ram - Corsair Vengence 1600 32GB (4 x 8GB)
Op Sys - Win 8 64 bit on Crucial V4 64gb SSD
Video Card - nVidia GT220
1 500gb 7200 WD HDD in tower
1 750gb 7200 Seagate HDD in tower
4 exteranl drives connected via USB or of which are 1tb each sata drives the other 2 are older drives of
250gb and 500gb.
Cooler Master Case HAF 932 Advanced -
Re: GA-Z77X-UD3H - Onboard Graphics are not working
Did you install the Intel graphics drivers? If not install them, reboot to BIOS and set up options for integrated graphics on the Peripherials page I think.Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me
Wifes: Z77X-UD5H / 3770K w/c with Raystorm copper block & 2 Rads/ Kingston HyperX RAM / Switch 810 case/ PowerColor AX7950 w/EK block
HTPC: Z68 Pro3 M / 2105
SOLD:Z97X-UD5H /4790K/F11b mod BIOS/[email protected] 4x4GB Kingston Genesis KHX24C11X3K4 2400 RAM 11-13-13-30
SOLD:Z87X-UD5H /4770K
-
Re: GA-Z77X-UD3H - Onboard Graphics are not working
.Attached FilesComment
-
-
Re: GA-Z77X-UD3H - Onboard Graphics are not working
What driver would that be. I got on the Gigabyte site and I don't see that driver. I've installed all other drivers for this board. I couldn't use the dvd that came with the board since i'm on win 8Originally posted by boondocks View Post
Update: I downloaded the VGA Driver and tried to install it and i'm told the system doesn't meet the minimum requirements. I don't get it. I don't know if this matters but I have win 8 on the SSD(Drive C) but am trying to apply the graphics driver from an HDD (Drive B)Last edited by Ronb; 12-08-2012, 01:17 PM.CPU - Intel i5-3570k
Motherboard - Gigabyte GA-Z77X-UD3H
BIOS Version - F18
Ram - Corsair Vengence 1600 32GB (4 x 8GB)
Op Sys - Win 8 64 bit on Crucial V4 64gb SSD
Video Card - nVidia GT220
1 500gb 7200 WD HDD in tower
1 750gb 7200 Seagate HDD in tower
4 exteranl drives connected via USB or of which are 1tb each sata drives the other 2 are older drives of
250gb and 500gb.
Cooler Master Case HAF 932 AdvancedComment
-
Re: GA-Z77X-UD3H - Onboard Graphics are not working
Yes, it's Intel VGA driver. Win 8 may already have it, I don't know. Usually when you first do updates on Win 7 it always wants to install it for me. Sure you tried to install the right one, that is 64 bit?
You might try looking in Control Panel under Programs and Features and see if it's already installed. If not I don't know what to tell you, I have no experience with Win 8.Maximus 8 Hero/6700K @ 4.8/4x4GB LPX @ 3200 15-17-17-36 CR1
Case Labs SM8 w/dual pedestals / Custom water w/ acrylic pipe / Light box
PowerColor 390Xw/EK block / Samsung 840 Pro 256GBx2 RAID 0 / 128GBx1 SSD's | 3 HDD's / DVD burner
Dual Aquaero 5 Pro controllers for pumps & fans / FC9 for led's only 2xD5 pwm w/Bitspower tops - MCP35x2 - 3x480 rads/1x240 rad/AP15 fans / EK supremcy
Seasonic Platinum 1000w custom fabbed/sleeved psu wiring by me
Wifes: Z77X-UD5H / 3770K w/c with Raystorm copper block & 2 Rads/ Kingston HyperX RAM / Switch 810 case/ PowerColor AX7950 w/EK block
HTPC: Z68 Pro3 M / 2105
SOLD:Z97X-UD5H /4790K/F11b mod BIOS/[email protected] 4x4GB Kingston Genesis KHX24C11X3K4 2400 RAM 11-13-13-30
SOLD:Z87X-UD5H /4770K
Comment
-
Re: GA-Z77X-UD3H - Onboard Graphics are not working
I got it. I had to enable Internal Graphics in the bios. it was set to Auto which confused me. Now I need to get the template for the bios so I can get ideas on moew settings but that's for another thread. thanks to both of you folks for the help. I'm looking at EasyTune 6 and the PCH setting is 127 degrees. Is that normal and what is PCH. I'm trying to take a screen shot of it but not having much success.Last edited by Ronb; 12-10-2012, 02:05 PM.CPU - Intel i5-3570k
Motherboard - Gigabyte GA-Z77X-UD3H
BIOS Version - F18
Ram - Corsair Vengence 1600 32GB (4 x 8GB)
Op Sys - Win 8 64 bit on Crucial V4 64gb SSD
Video Card - nVidia GT220
1 500gb 7200 WD HDD in tower
1 750gb 7200 Seagate HDD in tower
4 exteranl drives connected via USB or of which are 1tb each sata drives the other 2 are older drives of
250gb and 500gb.
Cooler Master Case HAF 932 AdvancedComment
-
Re: GA-Z77X-UD3H - Onboard Graphics are not working
glad to hear you got the igpu up and running.
The pch temp is the chipset and normally runs high so no worries.Comment
Comment