Ga-x79-ud3 marvel raid-0 question

[the edge]

I'm building a new system and am having a problem after booting into Windows 7 Premium concerning a RAID-0 on the Marvel 6GB/s chipset. The Marvel software sees the Raid-0 but Windows 7 does not?

I have 2 Corsair Force Series GT CSSD-F180GBGT-BK 2.5" 180GB SATA III Internal Solid State Drive (SSD) on the Intel Serial ATA 6 GB/s in RAID-0, this works fine

I have 2 Western Digital WD Black WD2002FAEX 2TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drives and want to take advantage of 6GB/s. since I have the Corsair SSDs on the Intel chipset I have to use the Marvel chipset. Problem is Windows 7 does not see the Raid-0 after installation.

So my question is why can't Windows-7 see the RAID-0 and what is the best way to set the two WD 2TB drives up when I install Windows-7 and after install so Windows sees the Raid-0 on the Marvel chipset?

my system components.

Core i7 3930 LGA 2011
GA-X79-UD3 Rev 1.0 BIOS f11
CORSAIR Vengeance 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 1866 Desktop Memory Model CMZ16GX3M4X1866C9
2 Corsair Force Series GT CSSD-F180GBGT-BK 2.5" 180GB SATA III Internal Solid State Drive (SSD)
2 Western Digital WD Black WD2002FAEX 2TB 7200 RPM 64MB Cache SATA 6.0Gb/s 3.5" Internal Hard Drives
MSI NVIDIA GTX 670
Enermax 1000w PSU
Coolermaster Cosmos II
Soundblaster X-Fi

[wazza300]

Re: Ga-x79-ud3 marvel raid-0 question

i think you need the marvell drivers? im not sure on marvell raid though