Announcement
Collapse
No announcement yet.
Overclocking Bug detected in bios F16 (GA-Z77X-D3H) v1.1
Collapse
X
-
Re: Overclocking Bug detected in bios F16 (GA-Z77X-D3H) v1.1
are you sure its not the voltage sticking from a prev higher oc? sometimes it will do that until you reflash the same bios and re enter your oc
beta's are fine,some have niggles and some don't,ive been as high as 5.1ghz with current beta for my board and its been fineGigabyte z77x UP4-TH F11c Modded Bios
Intel i7 3770k 24/[email protected] 1.38v Turbo llc +0.165v dvid multithreading enabled
Samsung Green(MV-3V4G3D/US) 8GB @2133mhz 9-10-10-21-1t 1.55v
Thermalright Silver Arrow Cpu Cooler
1xSamsung 840 pro 256 Gb SSD windows 8.1 pro 64bit
1xSamsung f4 HD204UI 2tb hard drive Storage
Powercolor 7970 3gb V3 @1150mhz core/1700mhz mem,1.150v Accelero aftermarket air cooler 55c max
Razer Lycosa Keyboard
Logitech X-530 5.1 Speakers
Lite-On iHAS124-19 24x Sata DVDRW
K-World Hybrid DVB-T 210SE Digital T.V Card
L.G E2260V L.E.D 1920x1080 Monitor
Xfx Pro 750w silver rated Psu 80+
Fractal Arc Midi Case
http://i38.tinypic.com/14myvfa.jpg x58 ud5 <=3.8ghz + 4.2ghz Overclock Template!!
http://www.youtube.com/user/warren304#p/u Visit Me On Youtube
Lots Of Gaming Videos With X58 Ud5 System And Gpu On My Youtube Channel!!
Just Uploaded New Battlefield 4 Video!!!!!!!!!!!!!!!!!!!!!!
Comment
-
Re: Overclocking Bug detected in bios F16 (GA-Z77X-D3H) v1.1
XhKizits,
Not all changes are published. The new version can fix the problems of which you didn't know and added new ones, of which you can never know about.
Should always check the "test version", not stable. Also "Stable" doesn't mean its "stable", some beta may work even better and "stable" than "Stable" version.
But you already know that...
As I said before: check beta or not - it's your decision. If it's still not fixed in latest beta version - please report.
My GA-Z77X-D3H rev 1.0 and friends rev 1.1 - didn't have that problem and the fan is worked on the correct speed with full speed at full load.
By using voltage control (not pwm) you can obtain lower speed.
That's why i asked you about settings and sensor data.
Well, I know how to do the entire system measuring, so I say, you're may wrong. I seen other review and made these measurements. They are dependent on the power supply and what you call "entire system" as well. There no complete information about the system.
No OC: 3570k+d3h+1xSsd+2xRam+monitor with 460w or 750w(80 silver)supply (~ almost your "dad's laptop") usually system run at ~70-80W. Black or white screen on monitor - readings will also be different 10-30w.
Also depend what "meterboard" really measures. Thanks for the info, but I already know that. But it doesn't really matter now.
Assistance is required informations, not a story. In your case, my advice will not help you. I am very busy now, thats why remove first message.Sorry for my English, its not my native language.
Comment
-
Re: Overclocking Bug detected in bios F16 (GA-Z77X-D3H) v1.1
Originally posted by wazza300 View Postare you sure its not the voltage sticking from a prev higher oc? sometimes it will do that until you reflash the same bios and re enter your oc
beta's are fine,some have niggles and some don't,ive been as high as 5.1ghz with current beta for my board and its been fine
I think your the right person to ask a different question, I won't ask it here but will pm you because I just noticed something on your sig and it has nothing to do with Gigabyte mobos.
Comment
-
Re: Overclocking Bug detected in bios F16 (GA-Z77X-D3H) v1.1
With the few that have encouraged me about beta bios, I put my reservations aside and attempted it. First the bios won't boot if you disable the startup logo screen so you have to remove the cmos battery and try again with it enabled. Secondly overclocks just don't stick the moment you reboot, its like oil and water. The cpu then has its maxed out core speed at 3.6Ghz instead of 3.8Ghz stock. That just confirms what I had earlier said, beta bios is a work in progress and can't be used in place of stable releases. For there to be a solution the problem must be identified first. So until there is some acknowledgement of its existence, it will continue to persist.
Comment
-
Re: Overclocking Bug detected in bios F16 (GA-Z77X-D3H) v1.1
Guys!
I got my present bios from here thanks to Stasio:- http://forums.tweaktown.com/gigabyte...tml#post274647
Now am able to get very consistent results. It seems the official gigabyte bios site isn't uploading properly fixed bios. Forum tweaktown bios is much better and stable.Last edited by XhKizits; 04-06-2013, 03:45 AM.
Comment
-
Re: Overclocking Bug detected in bios F16 (GA-Z77X-D3H) v1.1
I run into some issues pointing at the ram to be defective while priming with bios F17 so I downgraded to F16 set the 4.5Ghz that gave me prime stability in the first place and primed again. I got full prime stability without a single eventviewer error or prime error but failed with a 0x0124 error in less than 10min in bios F17. Tried upping the vcore,vtt,imc but got worse and increased the WHEA logger error in eventviewer with bios F17 but none at all in F16 only the temp issue as I seek higher OCs. Any suggestions?
Comment
Comment