Re: Socket 771 Mod Xeon X5460 GA-P35-DS3L Overclock
Well it booted into Windows fine but it didn't like LinX:
Looks like it's gonna' need some more juice! How much? Jim I'm gonna' wait for your call on that (and any other adjustments)... :)
Well it booted into Windows fine but it didn't like LinX:
Code:
*************************************** *************************************** Gigabyte GA-EP45-UD3P (Rev. 1.0) - F11d *************************************** *************************************** ****************************** MB Intelligent Tweaker(M.I.T.) ****************************** Robust Graphics Booster ..............: [Auto] CPU Clock Ratio ......................: [9X] x Fine CPU Clock Ratio................: [+0.5] CPU Frequency ........................: 4.00GHz( 422x9.5) ********** Clock Chip Control ******** >>>>> Standard Clock Control CPU Host Clock Control................: [Enabled] x CPU Host Frequency(Mhz).............: [422] PCI Express Frequency(Mhz)............: [100] C.I.A.2...............................: [Disabled] >>>>> Advanced Clock Control..........: [Press Enter] CPU Clock Drive.......................: [800mV] PCI Express Clock Drive...............: [900mV] CPU Clock Skew........................: [ 0ps] MCH Clock Skew........................: [ 0ps] ******** DRAM Performance Control ******** Performance Enhance...................: [Turbo] (G)MCH Frequency Latch................: [Auto] System Memory Multiplier (SPD)........: [Auto] Memory Frequency(Mhz).....800.........: 912 DRAM Timing Selectable (SPD)..........: [Manual] >>>>> Standard Timing Control x CAS Latency Time................5...: [Auto] x tRCD ...........................5...: [Auto] x tRP.............................5...: [Auto] x tRAS...........................18...: [Auto] >>>>> Advanced Timing Control.........: [Press Enter] x tRRD............................3...: [Auto] x tWTR............................3...: [Auto] x tWR.............................6...: [Auto] x tRFC...........................52...: [Auto] x tRTP............................3...: [Auto] x Command Rate (CMD) .............0...: [Auto] >>>>> Channel A Timing Settings.......: [Press Enter] x Static tRead Value.............8...: [Auto] x tRD Phase0 Adjustment...........0...: Auto x tRD Phase1 Adjustment...........0...: Auto x tRD Phase2 Adjustment ..........0...: Auto x tRD Phase3 Adjustment...........0...: Auto x Trd2rd(Different Rank)..........6...: Auto x Twr2wr(Different Rank)..........6...: Auto x Twr2rd(Different Rank)..........5...: Auto x Trd2wr(Same/Diff Rank)..........8...: Auto x DIMM1 Clock Skew Control (ps).......: Auto x DIMM2 Clock Skew Control (ps).......: Auto x DDR Write Training..................: Auto >>>>> Channel A Driving Settings......: [Press Enter] x Driving Strength Profile............: [Auto] x Data Driving Pull-Up Level..........: Auto x Cmd Driving Pull-Up level...........: Auto x Ctrl Driving Pull-Up Level..........: Auto x Clk Driving Pull-Up Level...........: Auto x Data Driving Pull-Down Level........: Auto x Cmd Driving Pull-Down level.........: Auto x Ctrl Driving Pull-Down Level........: Auto x Clk Driving Pull-Down Level.........: Auto >>>>> Channel B Timing Settings.......: [Press Enter] x Static tRead Value.............8...: [Auto] x tRD Phase0 Adjustment...........0...: Auto x tRD Phase1 Adjustment...........0...: Auto x tRD Phase2 Adjustment ..........0...: Auto x tRD Phase3 Adjustment...........0...: Auto x Trd2rd(Different Rank)..........6...: Auto x Twr2wr(Different Rank)..........6...: Auto x Twr2rd(Different Rank)..........5...: Auto x Trd2wr(Same/Diff Rank)..........8...: Auto x DIMM1 Clock Skew Control (ps).......: Auto x DIMM2 Clock Skew Control (ps).......: Auto x DDR Write Training..................: Auto >>>>> Channel B Driving Settings......: [Press Enter] x Driving Strength Profile............: [Auto] x Data Driving Pull-Up Level..........: Auto x Cmd Driving Pull-Up level...........: Auto x Ctrl Driving Pull-Up Level..........: Auto x Clk Driving Pull-Up Level...........: Auto x Data Driving Pull-Down Level........: Auto x Cmd Driving Pull-Down level.........: Auto x Ctrl Driving Pull-Down Level........: Auto x Clk Driving Pull-Down Level.........: Auto ****** Motherboard Voltage Control ****** Voltage Types..........Normal...........Current ----------------------------------------------- >>> CPU Load-Line Calibration.................: [Enabled] CPU Vcore..............1.23750V.......: [1.35000V] CPU Termination........1.200V.........: [1.260V] CPU PLL................1.500V.........: [1.570V] CPU Reference..........0.760V.........: [Auto] >>> MCH/ICH MCH Core...............1.100V.........: [1.200V] MCH Reference..........0.760V.........: [Auto] MCH/DRAM Reference.....0.900V.........: [Auto] ICH I/O................1.500V.........: [Auto] ICH Core...............1.100V.........: [Auto] >>> DRAM DRAM Voltage...........1.800V.........: [2.100V] DRAM Termination.......0.900V.........: [Auto] Channel A Reference....0.900V.........: [Auto] Channel B Reference....0.900V.........: [Auto] ******** Advanced BIOS Features ******** Hard Disk Boot Priority...............: [Press Enter] Quick Boot............................: [Disabled] First Boot Device.....................: [USB-HDD] Second Boot Device....................: [Hard Disk] Third Boot Device.....................: [Disabled] Boot Up Floppy Seek...................: [Disabled] Boot Up Num-Lock......................: [Off] Password Check........................: [Setup] HDD S.M.A.R.T. Capability.............: [Disabled] Limit CPUID Max. to 3.................: [Disabled] No-Execute Memory Protect.............: [Enabled] CPU Enhanced Halt (C1E)...............: [Disabled] C2/C2E State Support..................: [Disabled] CPU Thermal Monitor 2(TM2) ...........: [Enabled] CPU EIST Function.....................: [Disabled] Virtualization Technology.............: [Disabled] Delay For HDD (Secs)..................: [ 0] Full Screen LOGO Show.................: [Disabled] Bachup BIOS Image to HDD..............: [Disabled] Init Display First....................: [PEG] ******** Integrated Peripherals ******** ICH SATA Control Mode.................: [AHCI] SATA Port0-3 Native Mode..............: [Enabled] Azalia Codec..........................: [Auto] Onboard H/W 1394......................: [Enabled] Onboard H/W Lan1......................: [Enabled] Onboard H/W Lan2......................: [Enabled] Green LAN.............................: [Disabled] Smart LAN1............................: [Press Enter] Smart LAN2............................: [Press Enter] Onboard LAN1 BOOT ROM.................: [Disabled] Onboard LAN2 BOOT ROM.................: [Disabled] Onboard SATA/IDE Device...............: [Enabled] Onboard SATA/IDE Ctrl Mode............: [AHCI] Onboard Serial Port 1.................: [3F8/IRQ4] Onboard Parallel Port.................: [378/IRQ7] Parallel Port Mode....................: [SPP] xECP Mode Use DMA.....................: 3 USB Controllers.......................: [Enabled] USB Keyboard Function.................: [Disabled] USB Mouse Function....................: [Disabled] USB Storage Function..................: [Enabled] ******** Power Management Setup ******** ACPI Suspend Type.....................: [S3(STR)] USB Device Wake-Up From S3............: [Enabled] Soft-Off by PWR-BTTN..................: [Instant-Off] PME Event Wake Up.....................: [Enabled] Power On by Ring......................: [Disabled] Resume by Alarm.......................: [Disabled] HPET Support..........................: [Enabled] HPET Mode.............................: [64-bit mode] Power On By Mouse.....................: [Double Click] Power On By Keyboard..................: [Disabled] AC Back Function......................: [Soft-Off] ******** PnP/PCI Configurations ******** Resources Controlled By...............: [Auto] PCI Latency Timer (CLK)...............: [32] PC1 IRQ Assignment....................: [Auto] PC2 IRQ Assignment....................: [Auto] *********** PC Health status *********** Reset Case Open Status................: [Disabled] CPU Warning Temperature...............: [80�C/176�F] CPU FAN Fail Warning..................: [Disabled] SYSTEM FAN2 Fail Warning..............: [Disabled] POWER FAN Fail Warning................: [Disabled] SYSTEM FAN1 Fail Warning..............: [Disabled] CPU Smart FAN Control.................: [Disabled]
Comment