GA-X99-UD5 Not posting on boot when internal card reader connected to usb 2

[pterem]

Hi
I have a new A-X99-UD5 mother board that will not post with the internal memory card reader connected to the usb 2 port on the main board.
It is a six slot reader card for sd/mmc/micro sd etc... When ever I try to boot the machine it just beeps shuts down and re-starts in a continuous loop. When I disconnect the card from the usb2 port on the board the machine will boot immediately with no trouble. Once booted I can plug the card back in and the machine will read it with no trouble. Any help??

[Vinster]

Re: GA-X99-UD5 Not posting on boot when internal card reader connected to usb 2

What is your boot order in the bios?

Vin

[pterem]

Re: GA-X99-UD5 Not posting on boot when internal card reader connected to usb 2

Hi
I did check that first thing and my boot order is my 1 solid state drive,2 CD/DVD 3 last USB.

[Vinster]

Re: GA-X99-UD5 Not posting on boot when internal card reader connected to usb 2

and if you hit F12 to get to the boot menu, does it come up and can you select your SSD to boot?

Vin

[pterem]

Re: GA-X99-UD5 Not posting on boot when internal card reader connected to usb 2

At that time it wouldn't even let me into the boot menu. I did go to the gigabyte support site and found a bios update for my problem. It was the latest bios update but also a beta. I installed the update and the computer boots with the card attached now with no problem. I now have a new problem ARGGGGG. The computer will not stay shut down when I hibernate or go to the shut down mode in menu. It shuts off for about 15 seconds and re-starts again. I don't know if it is a coincidence and it's an OS problem or the bios update caused it.