In response to the response from Lsdmeasap (thanks!), posting my specs:
Mobo: Gigabyte EP45-UD3P
CPU: Q9550
CPU Cooler: Arctic Freezer 7 Pro
Mem: G.SKILL 4GB (2 x 2GB) DDR2 1066 (PC2 8500) 5-5-5-15
Newegg.com - G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory - Desktop Memory
PSU: Corsair 650 Watt
Case: Coooler Master Storm Sniper 2x200 fans, 2x120 fans.
Again, for first OC, looking to go to 3.2 GHz.
Settings, at the moment:
MB Intelligent Tweaker(M.I.T.)
Robust graphics Booster: Auto
CPU Clock Ratio: 8
Fine CPU Clock Ratio: +0.5
CPU Frequency: 2.83 GHz (333x8.5)
Clock Chip Control
CPU Clock Control: Disabled
CPU Host Frequency: 333 MHz
PCI Express Frequency: 100
CIA2: Disabled
Advanced Clck Control
CPU Clock Drive: 700mv
PCI Express Clock Drive: 700mv
CPU Clock Skew: 0ps
MCH Clock Skew: 0ps
DRAM Performance Control
Performance Enhance: Standard
Extreme Memory Profile: (X.M.P.): Auto
MCH Frquency Latch: Auto
System Memory Multiplier (SPD): Auto
Memory Frequency (MHz): 1066
DRAM Timing Selectable (SPD): Auto
Standard Timing Control
CAS Latency Time: 5
tRCD: 5
tRP: 5
tRAS: 15
Advanced Timing Control
tRRD: 4 Auto
tWTR 4 Auto
tWR 13 Auto
tRFC 68 Auto
tRTP4 Auto
Command Rate (CMD) 0 Auto
Driving Strength Profiles
All on Auto
Channel A Settings
Static tRead Value: 6 Auto
tRD Phase0 Adjustment: 0 Auto
tRD Phase1 Adjustment: 0 Auto
tRD Phase2 Adjustment: 0 Auto
tRD Phase3 Adjustment: 0 Auto
Trd2rd(Different Rank): 8 Auto
Twr2wr(Different Rank): 8 Auto
Twr2rd(Different Rank): 7 Auto
Trd2wr(Same/Diff Rank): 9 Auto
Dimm1 Clock Skew Control: Auto
Dimm2 Clock Skew Control: Auto
DDR Write Training: Auto
Channel B
Same as Channel A
Motherboard Voltage Control
CPU
Load Line Calibration: Disabled
CPU Vcore: 1.23750V Auto
CPU Termination: 1.200V Auto
CPU PLL 1.500V Auto
CPU Reference: 0.76V Auto
MCH/ICH
MCH Core: 1.100V Auto
MCH Reference: 0.76 Auto
MCH/DRAM Reference: 0.900V Auto
ICH I/O: 1.500V Auto
ICH Core: 1.100 Auto
DRAM
DRAM Voltage: 1.800V Auto
DRAM Termination: 0.900V Auto
Channel A Reference: 0.900V Auto
Channel B Reference: 0.900V Auto
Advanced Settings
Limit CPUID Max. to 3: Disabled
No-Execute Memory Protect: Enabled
CPU Enhanced Halt (C1E) Enabled
C2/C2E State Support: Disabled
x C4/C4E State Support: Disabled
CPU Thermal Monitor 2(TM2): Enabled
CPU EIST Function: Enabled
Virtualization Technology: Enabled
Integrated Peripherals
Legacy USB Storage Detect: Enabled
Mobo: Gigabyte EP45-UD3P
CPU: Q9550
CPU Cooler: Arctic Freezer 7 Pro
Mem: G.SKILL 4GB (2 x 2GB) DDR2 1066 (PC2 8500) 5-5-5-15
Newegg.com - G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory - Desktop Memory
PSU: Corsair 650 Watt
Case: Coooler Master Storm Sniper 2x200 fans, 2x120 fans.
Again, for first OC, looking to go to 3.2 GHz.
Settings, at the moment:
MB Intelligent Tweaker(M.I.T.)
Robust graphics Booster: Auto
CPU Clock Ratio: 8
Fine CPU Clock Ratio: +0.5
CPU Frequency: 2.83 GHz (333x8.5)
Clock Chip Control
CPU Clock Control: Disabled
CPU Host Frequency: 333 MHz
PCI Express Frequency: 100
CIA2: Disabled
Advanced Clck Control
CPU Clock Drive: 700mv
PCI Express Clock Drive: 700mv
CPU Clock Skew: 0ps
MCH Clock Skew: 0ps
DRAM Performance Control
Performance Enhance: Standard
Extreme Memory Profile: (X.M.P.): Auto
MCH Frquency Latch: Auto
System Memory Multiplier (SPD): Auto
Memory Frequency (MHz): 1066
DRAM Timing Selectable (SPD): Auto
Standard Timing Control
CAS Latency Time: 5
tRCD: 5
tRP: 5
tRAS: 15
Advanced Timing Control
tRRD: 4 Auto
tWTR 4 Auto
tWR 13 Auto
tRFC 68 Auto
tRTP4 Auto
Command Rate (CMD) 0 Auto
Driving Strength Profiles
All on Auto
Channel A Settings
Static tRead Value: 6 Auto
tRD Phase0 Adjustment: 0 Auto
tRD Phase1 Adjustment: 0 Auto
tRD Phase2 Adjustment: 0 Auto
tRD Phase3 Adjustment: 0 Auto
Trd2rd(Different Rank): 8 Auto
Twr2wr(Different Rank): 8 Auto
Twr2rd(Different Rank): 7 Auto
Trd2wr(Same/Diff Rank): 9 Auto
Dimm1 Clock Skew Control: Auto
Dimm2 Clock Skew Control: Auto
DDR Write Training: Auto
Channel B
Same as Channel A
Motherboard Voltage Control
CPU
Load Line Calibration: Disabled
CPU Vcore: 1.23750V Auto
CPU Termination: 1.200V Auto
CPU PLL 1.500V Auto
CPU Reference: 0.76V Auto
MCH/ICH
MCH Core: 1.100V Auto
MCH Reference: 0.76 Auto
MCH/DRAM Reference: 0.900V Auto
ICH I/O: 1.500V Auto
ICH Core: 1.100 Auto
DRAM
DRAM Voltage: 1.800V Auto
DRAM Termination: 0.900V Auto
Channel A Reference: 0.900V Auto
Channel B Reference: 0.900V Auto
Advanced Settings
Limit CPUID Max. to 3: Disabled
No-Execute Memory Protect: Enabled
CPU Enhanced Halt (C1E) Enabled
C2/C2E State Support: Disabled
x C4/C4E State Support: Disabled
CPU Thermal Monitor 2(TM2): Enabled
CPU EIST Function: Enabled
Virtualization Technology: Enabled
Integrated Peripherals
Legacy USB Storage Detect: Enabled
Comment