Hello Everyone, I just performed my first oc and was wondering if you guys can lend a hand. I been at this for two days now off and on, and i just cant seem to get the setting correct two get this chip stable at 4.3Ghz or 4.2.
Here is a screenshot when i had it at 4.1Ghz, but was getting an error from orthos that read "FATAL ERROR: Rounding was 0.5, expected less than 0.4"
The chip is an E8500 and the board is a GIGABYTE GA-EP45-UD3R
Now im try for 4.22 with the following setting and the machine will either bsod, or just reboot. Any help would be great, thank you.
Try For 4.22Ghz Here:
CPU clock ratio: 9x
Fine CPU Clock Ratio [+0.5]
CPU Host Frequency (Mhz) [445]
PCI Express Frequency (Mhz) [100]
Performance Enhance [Standard]
System Memory Multiplier [2.00D]
MCH Frequency Latch [Auto]
Advance Clock Chip Control
CPU Clock Drive [800mV]
PCI Express Clock Drive [900mV]
CPU Clock Skew [0ps]
MCH Clock Skew [0ps]
Load Line Calibration [Enabled]
[Voltage]
CPU Vcore=1.3625 Volts [Manual]
CPU Termination=1.34 Volts [Manual]
CPU PLL=1.50 Volts [Auto]
CPU Reference=0.760 Volts [Auto]
[MCH/ICH]
MCH Core=1.260 Volts [Manual]
MCH Reference=0.760 Volts [Auto]
MCH/DRAM Reference=0.900000 Volts [Auto]
ICH I/O=1.500000 Volts [Auto]
ICH Core=1.100000 Volts [Auto]
[DRAM]
DRAM Voltage=2.000000 Volts [Manual]
DRAM Termination=0.900000 Volts [Auto]
Channel A Reference=0.900000 Volts [Auto]
Channel B Reference=0.900000 Volts [Auto]
DRAM Timing Control [Auto]
4 cas
4 trcd
4 trp
12 tras
Here is a screenshot when i had it at 4.1Ghz, but was getting an error from orthos that read "FATAL ERROR: Rounding was 0.5, expected less than 0.4"
The chip is an E8500 and the board is a GIGABYTE GA-EP45-UD3R
Now im try for 4.22 with the following setting and the machine will either bsod, or just reboot. Any help would be great, thank you.
Try For 4.22Ghz Here:
CPU clock ratio: 9x
Fine CPU Clock Ratio [+0.5]
CPU Host Frequency (Mhz) [445]
PCI Express Frequency (Mhz) [100]
Performance Enhance [Standard]
System Memory Multiplier [2.00D]
MCH Frequency Latch [Auto]
Advance Clock Chip Control
CPU Clock Drive [800mV]
PCI Express Clock Drive [900mV]
CPU Clock Skew [0ps]
MCH Clock Skew [0ps]
Load Line Calibration [Enabled]
[Voltage]
CPU Vcore=1.3625 Volts [Manual]
CPU Termination=1.34 Volts [Manual]
CPU PLL=1.50 Volts [Auto]
CPU Reference=0.760 Volts [Auto]
[MCH/ICH]
MCH Core=1.260 Volts [Manual]
MCH Reference=0.760 Volts [Auto]
MCH/DRAM Reference=0.900000 Volts [Auto]
ICH I/O=1.500000 Volts [Auto]
ICH Core=1.100000 Volts [Auto]
[DRAM]
DRAM Voltage=2.000000 Volts [Manual]
DRAM Termination=0.900000 Volts [Auto]
Channel A Reference=0.900000 Volts [Auto]
Channel B Reference=0.900000 Volts [Auto]
DRAM Timing Control [Auto]
4 cas
4 trcd
4 trp
12 tras
Comment