Lsdmeasap ... These are the settings I have used thus far. Stable means that Prime95 ran for a couple of hours and did not just gag after 10 minutes.
3.4GHz Stable
Robust Graphics Booster________________ [Auto]<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
CPU Clock Ratio _______________________ [ 9X] <o:p></o:p>
xFine Clock Ratio _____________________ +0.0<o:p></o:p>
CPU Frequency(MHz)__________________ 3.40GHz(378x9)<o:p></o:p>
CPU Host Clock Control__________________[Enabled]<o:p></o:p>
CPU Host Frequency(MHz)________________ [378] <o:p></o:p>
PCI Express Frequency(Mhz)_____________ [100]<o:p></o:p>
C.I.A. 2_______________________________ [Disabled]<o:p></o:p>
Performance Enhance____________________ [Standard]<o:p></o:p>
System Memory Multiplier (SPD)_________ [2.00A]<o:p></o:p>
Memory Frequency(MHz)______________800__ 756<o:p></o:p>
DRAM Timing Selectable (SPD)___________ [Manual]<o:p></o:p>
<o:p></o:p>
***********Standard Timing Control***************<o:p></o:p>
<o:p></o:p>
CAS Latency Time_____________________5__ [5]<o:p></o:p>
Dram RAS# to CAS# Delay______________5__ [5]<o:p></o:p>
Dram RAS# Precharge Delay____________5__ [5]<o:p></o:p>
Precharge Delay (tRAS)______________20__ [15]<o:p></o:p>
<o:p></o:p>
***********Advanced Timing Control***************<o:p></o:p>
<o:p></o:p>
ACT to ACT Delay (tRRD)______________3___[Auto]<o:p></o:p>
Rank Write to READ Delay_____________3___[Auto]<o:p></o:p>
Write to Precharge Delay_____________6__ [Auto]<o:p></o:p>
Refresh to ACT Delay________________52___[ 62]<o:p></o:p>
Read to Precharge Delay______________3__ [Auto]<o:p></o:p>
Static tRead Value___________________9__ [7]<o:p></o:p>
Static tRead Phase Adjust____________1__ [Auto]<o:p></o:p>
Command Rate (CMD)___________________2__ [Auto]<o:p></o:p>
<o:p></o:p>
*********Clock Driving & Skew Control************<o:p></o:p>
<o:p></o:p>
CPU/PCIEX Clock Driving Control________ [800mV]<o:p></o:p>
CPU Clock Skew Control_________________ [Normal]<o:p></o:p>
(G)MCH Clock Skew Control______________ [100ps]<o:p></o:p>
<o:p></o:p>
System Voltage Control_________________ [Manual]<o:p></o:p>
DDR2 OverVoltage Control_______________ [+0.025V]<o:p></o:p>
PCI-E OverVoltage Control______________ [Normal] <o:p></o:p>
FSB OverVoltage Control________________ [+0.15V] <o:p></o:p>
(G)MCH OverVoltage Control_____________ [+0.175]<o:p></o:p>
Loadline Calibraton____________________ [Enable]<o:p></o:p>
CPU Voltage Control____________________ [1.33125V]<o:p></o:p>
Normal CPU Core________________________ 1.22500V
==================================================
3.6GHz Stable<o:p></o:p>
<o:p></o:p>
Robust Graphics Booster________________ [Auto]<o:p></o:p>
CPU Clock Ratio _______________________ [ 9X] <o:p></o:p>
xFine Clock Ratio _____________________ +0.0<o:p></o:p>
CPU Frequency(MHz)__________________ 3.60GHz(400x9)<o:p></o:p>
CPU Host Clock Control__________________[Enabled]<o:p></o:p>
CPU Host Frequency(MHz)________________ [400] <o:p></o:p>
PCI Express Frequency(Mhz)_____________ [100]<o:p></o:p>
C.I.A. 2_______________________________ [Disabled]<o:p></o:p>
Performance Enhance____________________ [Standard]<o:p></o:p>
System Memory Multiplier (SPD)_________ [2.66D]<o:p></o:p>
Memory Frequency(MHz)______________800__ 1066<o:p></o:p>
DRAM Timing Selectable (SPD)___________ [Manual]<o:p></o:p>
<o:p></o:p>
***********Standard Timing Control***************<o:p></o:p>
<o:p></o:p>
CAS Latency Time_____________________5__ [5]<o:p></o:p>
Dram RAS# to CAS# Delay______________5__ [5]<o:p></o:p>
Dram RAS# Precharge Delay____________5__ [5]<o:p></o:p>
Precharge Delay (tRAS)______________15__ [15]<o:p></o:p>
<o:p></o:p>
***********Advanced Timing Control***************<o:p></o:p>
<o:p></o:p>
ACT to ACT Delay (tRRD)______________3___[3]<o:p></o:p>
Rank Write to READ Delay_____________3___[8]<o:p></o:p>
Write to Precharge Delay_____________6__ [10]<o:p></o:p>
Refresh to ACT Delay________________52___[ 52]<o:p></o:p>
Read to Precharge Delay______________3__ [3]<o:p></o:p>
Static tRead Value___________________9__ [7]<o:p></o:p>
Static tRead Phase Adjust____________1__ [Auto]<o:p></o:p>
Command Rate (CMD)___________________2__ [Auto]<o:p></o:p>
<o:p></o:p>
*********Clock Driving & Skew Control************<o:p></o:p>
<o:p></o:p>
CPU/PCIEX Clock Driving Control________ [800mV]<o:p></o:p>
CPU Clock Skew Control_________________ [Normal]<o:p></o:p>
(G)MCH Clock Skew Control______________ [Normal]<o:p></o:p>
<o:p></o:p>
System Voltage Control_________________ [Manual]<o:p></o:p>
DDR2 OverVoltage Control_______________ [+0.030V]<o:p></o:p>
PCI-E OverVoltage Control______________ [Normal] <o:p></o:p>
FSB OverVoltage Control________________ [+0.20V] <o:p></o:p>
(G)MCH OverVoltage Control_____________ [+0.200]<o:p></o:p>
Loadline Calibraton____________________ [Enable]<o:p></o:p>
CPU Voltage Control____________________ [1.28125V]<o:p></o:p>
Normal CPU Core________________________ 1.22500V
3.4GHz Stable
Robust Graphics Booster________________ [Auto]<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" /><o:p></o:p>
CPU Clock Ratio _______________________ [ 9X] <o:p></o:p>
xFine Clock Ratio _____________________ +0.0<o:p></o:p>
CPU Frequency(MHz)__________________ 3.40GHz(378x9)<o:p></o:p>
CPU Host Clock Control__________________[Enabled]<o:p></o:p>
CPU Host Frequency(MHz)________________ [378] <o:p></o:p>
PCI Express Frequency(Mhz)_____________ [100]<o:p></o:p>
C.I.A. 2_______________________________ [Disabled]<o:p></o:p>
Performance Enhance____________________ [Standard]<o:p></o:p>
System Memory Multiplier (SPD)_________ [2.00A]<o:p></o:p>
Memory Frequency(MHz)______________800__ 756<o:p></o:p>
DRAM Timing Selectable (SPD)___________ [Manual]<o:p></o:p>
<o:p></o:p>
***********Standard Timing Control***************<o:p></o:p>
<o:p></o:p>
CAS Latency Time_____________________5__ [5]<o:p></o:p>
Dram RAS# to CAS# Delay______________5__ [5]<o:p></o:p>
Dram RAS# Precharge Delay____________5__ [5]<o:p></o:p>
Precharge Delay (tRAS)______________20__ [15]<o:p></o:p>
<o:p></o:p>
***********Advanced Timing Control***************<o:p></o:p>
<o:p></o:p>
ACT to ACT Delay (tRRD)______________3___[Auto]<o:p></o:p>
Rank Write to READ Delay_____________3___[Auto]<o:p></o:p>
Write to Precharge Delay_____________6__ [Auto]<o:p></o:p>
Refresh to ACT Delay________________52___[ 62]<o:p></o:p>
Read to Precharge Delay______________3__ [Auto]<o:p></o:p>
Static tRead Value___________________9__ [7]<o:p></o:p>
Static tRead Phase Adjust____________1__ [Auto]<o:p></o:p>
Command Rate (CMD)___________________2__ [Auto]<o:p></o:p>
<o:p></o:p>
*********Clock Driving & Skew Control************<o:p></o:p>
<o:p></o:p>
CPU/PCIEX Clock Driving Control________ [800mV]<o:p></o:p>
CPU Clock Skew Control_________________ [Normal]<o:p></o:p>
(G)MCH Clock Skew Control______________ [100ps]<o:p></o:p>
<o:p></o:p>
System Voltage Control_________________ [Manual]<o:p></o:p>
DDR2 OverVoltage Control_______________ [+0.025V]<o:p></o:p>
PCI-E OverVoltage Control______________ [Normal] <o:p></o:p>
FSB OverVoltage Control________________ [+0.15V] <o:p></o:p>
(G)MCH OverVoltage Control_____________ [+0.175]<o:p></o:p>
Loadline Calibraton____________________ [Enable]<o:p></o:p>
CPU Voltage Control____________________ [1.33125V]<o:p></o:p>
Normal CPU Core________________________ 1.22500V
==================================================
3.6GHz Stable<o:p></o:p>
<o:p></o:p>
Robust Graphics Booster________________ [Auto]<o:p></o:p>
CPU Clock Ratio _______________________ [ 9X] <o:p></o:p>
xFine Clock Ratio _____________________ +0.0<o:p></o:p>
CPU Frequency(MHz)__________________ 3.60GHz(400x9)<o:p></o:p>
CPU Host Clock Control__________________[Enabled]<o:p></o:p>
CPU Host Frequency(MHz)________________ [400] <o:p></o:p>
PCI Express Frequency(Mhz)_____________ [100]<o:p></o:p>
C.I.A. 2_______________________________ [Disabled]<o:p></o:p>
Performance Enhance____________________ [Standard]<o:p></o:p>
System Memory Multiplier (SPD)_________ [2.66D]<o:p></o:p>
Memory Frequency(MHz)______________800__ 1066<o:p></o:p>
DRAM Timing Selectable (SPD)___________ [Manual]<o:p></o:p>
<o:p></o:p>
***********Standard Timing Control***************<o:p></o:p>
<o:p></o:p>
CAS Latency Time_____________________5__ [5]<o:p></o:p>
Dram RAS# to CAS# Delay______________5__ [5]<o:p></o:p>
Dram RAS# Precharge Delay____________5__ [5]<o:p></o:p>
Precharge Delay (tRAS)______________15__ [15]<o:p></o:p>
<o:p></o:p>
***********Advanced Timing Control***************<o:p></o:p>
<o:p></o:p>
ACT to ACT Delay (tRRD)______________3___[3]<o:p></o:p>
Rank Write to READ Delay_____________3___[8]<o:p></o:p>
Write to Precharge Delay_____________6__ [10]<o:p></o:p>
Refresh to ACT Delay________________52___[ 52]<o:p></o:p>
Read to Precharge Delay______________3__ [3]<o:p></o:p>
Static tRead Value___________________9__ [7]<o:p></o:p>
Static tRead Phase Adjust____________1__ [Auto]<o:p></o:p>
Command Rate (CMD)___________________2__ [Auto]<o:p></o:p>
<o:p></o:p>
*********Clock Driving & Skew Control************<o:p></o:p>
<o:p></o:p>
CPU/PCIEX Clock Driving Control________ [800mV]<o:p></o:p>
CPU Clock Skew Control_________________ [Normal]<o:p></o:p>
(G)MCH Clock Skew Control______________ [Normal]<o:p></o:p>
<o:p></o:p>
System Voltage Control_________________ [Manual]<o:p></o:p>
DDR2 OverVoltage Control_______________ [+0.030V]<o:p></o:p>
PCI-E OverVoltage Control______________ [Normal] <o:p></o:p>
FSB OverVoltage Control________________ [+0.20V] <o:p></o:p>
(G)MCH OverVoltage Control_____________ [+0.200]<o:p></o:p>
Loadline Calibraton____________________ [Enable]<o:p></o:p>
CPU Voltage Control____________________ [1.28125V]<o:p></o:p>
Normal CPU Core________________________ 1.22500V
Comment