Ud3p / q9500 / 6400cl5d-4gbpq ???

[E DUB]

I was wondering if anyone knows what this RAM is capable off with this setup. I've read elsewhere people running 1:1 at 475.... can anyone confirm or recommend against this? Also, I will be adding 4 more gigs when I get Windows 7 64 bit in a couple months. Anyone have issues OCing 8 GBs of this RAM?
Thanks
- E

[Lsdmeasap]

Re: Ud3p / q9500 / 6400cl5d-4gbpq ???

8GB of ram you will need to keep under 1000Mhz, or you will have issues. Being that this is only 800Mhz ram you likely may be fine at 800-900 with 8GB

[E DUB]

Re: Ud3p / q9500 / 6400cl5d-4gbpq ???

Do you think I will be able to run 8 gigs at my current 471mhz setup?
I really don't want to buy 8 gigs of 1066 (rather buy 4 more 800)...

[4x64]

Re: Ud3p / q9500 / 6400cl5d-4gbpq ???

I have that same set up running in another computer here, It is using a q6600 over clocked to 3.2 and my 8gbs of G skill Pi 6400's RAM are running at 960.
Here are my settings for them:
Dram Timing (MANUAL)
CAS (CL) 4
tRCD 4
tRP 4
tRAS 12
Advanced Timing Control
tRRD 4
tWTR 4
tWR 8
tRFC 68
tRTP 4
Command Rate CMD 2
Static Read 8
Load Line Calibration (ENABLED)
MCH Core 1.400
ICH Core 1.200
DRAM Voltage 2.00