Well,im new to OC-ing...I ve learned basics and succeded to get stable 4,42GHz but I want 4,5...xD
I just want to get it stable...I dont think that vcore is problem cos I can boot it with higher FSB and low vcore but it fails prime 95...Even if I raise vcore alot it still fails prime95...
my mit:
N-means normal
CPU =e8400
Motherboard = ep45-ud3p
BIOS Version = F4
Ram = kingmax 1066Mhz
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster .............:fast
CPU Clock Ratio .....................:8x
Fine CPU Clock Ratio.................:+0,5
CPU Frequency .......................:4,42Ghz
Clock Chip Control
Standard Clock Control
CPU Host Clock Control...............:enabled
CPU Host Frequency (Mhz) ............:520
PCI Express Frequency (Mhz) .........:auto
DRAM Performance Control
Performance Enhance..................:standard
Extreme Memory Profile (X.M.P.)......:i dont have that
(G)MCH Frequency Latch...............:333
System Memory Multiplier ............:2,40B
Memory Frequency (Mhz) ..............:around 1066
DRAM Timing Selectable ..............:manual
Standard Timing Control
CAS Latency Time.....................:6
tRCD ................................:6
tRP..................................:6
tRAS.................................:18
Advanced Timing Control
tRRD.................................:3 auto
tWTR.................................:3 auto
tWR..................................:6 auto
tRFC.................................:52auto
tRTP.................................:3 auto
Command Rate (CMD) ..................:0 auto
Channel A
Static tRead Value...................:9 auto
Channel B
Static tRead Value...................:9 auto
Motherboard Voltage Control
CPU
Load Line Calibration (LLC) .........:enabled
CPU Vcore............................:1,39375
CPU Termination.....1.200V*..........:1,3
CPU PLL.............1.500V*..........:1,59
CPU Referen.........0.755V*..........:normal
MCH/ICH
MCH Core............1.100V...........:1,280
MCH Reference.......0.800V...........:0,783
MCH/DRAM Ref........0.900V...........:N
ICH I/O.............1.500V...........:N
ICH Core............1.100V...........:N
DRAM
DRAM Voltage .........1.800V.........:2,000V
DRAM Termination .....0.900V.........:N
Channel A Reference ..0.900V.........:N
Channel B Reference ..0.900V.........:N
I just want to get it stable...I dont think that vcore is problem cos I can boot it with higher FSB and low vcore but it fails prime 95...Even if I raise vcore alot it still fails prime95...
my mit:
N-means normal
CPU =e8400
Motherboard = ep45-ud3p
BIOS Version = F4
Ram = kingmax 1066Mhz
MB Intelligent Tweaker(M.I.T.)
Robust Graphics Booster .............:fast
CPU Clock Ratio .....................:8x
Fine CPU Clock Ratio.................:+0,5
CPU Frequency .......................:4,42Ghz
Clock Chip Control
Standard Clock Control
CPU Host Clock Control...............:enabled
CPU Host Frequency (Mhz) ............:520
PCI Express Frequency (Mhz) .........:auto
DRAM Performance Control
Performance Enhance..................:standard
Extreme Memory Profile (X.M.P.)......:i dont have that
(G)MCH Frequency Latch...............:333
System Memory Multiplier ............:2,40B
Memory Frequency (Mhz) ..............:around 1066
DRAM Timing Selectable ..............:manual
Standard Timing Control
CAS Latency Time.....................:6
tRCD ................................:6
tRP..................................:6
tRAS.................................:18
Advanced Timing Control
tRRD.................................:3 auto
tWTR.................................:3 auto
tWR..................................:6 auto
tRFC.................................:52auto
tRTP.................................:3 auto
Command Rate (CMD) ..................:0 auto
Channel A
Static tRead Value...................:9 auto
Channel B
Static tRead Value...................:9 auto
Motherboard Voltage Control
CPU
Load Line Calibration (LLC) .........:enabled
CPU Vcore............................:1,39375
CPU Termination.....1.200V*..........:1,3
CPU PLL.............1.500V*..........:1,59
CPU Referen.........0.755V*..........:normal
MCH/ICH
MCH Core............1.100V...........:1,280
MCH Reference.......0.800V...........:0,783
MCH/DRAM Ref........0.900V...........:N
ICH I/O.............1.500V...........:N
ICH Core............1.100V...........:N
DRAM
DRAM Voltage .........1.800V.........:2,000V
DRAM Termination .....0.900V.........:N
Channel A Reference ..0.900V.........:N
Channel B Reference ..0.900V.........:N