Rig is in my sig:
Here's the problem:
--I can get a stable OC at 3.8Ghz or 4Ghz on my 920 C0, P95 for 20 hours.
--However, I was not able to suspend to RAM or reboot w/o errors.
--Relaxed timings on RAM to 99926 cmd 80 and now I can cold or soft boot successfully. I cannot suspend to RAM though.
UPDATE:
Just had another BIOS warning on bootup. set my settings differently and booted right up, but I haven't tested for reboot. Here are my current settings:
CPU vCore: 1.393
QPI/Vtt: 1.36
CPU PLL: 1.88
RAM v 1.64 (BIOS allows only 1.64/1.66 not 1.65)
Sys Mem Multi.: 1140
CPU clock: 20 3.8Ghz
QPI/Link Speed 6.84GHz
Uncore Freq: 2470
Bclk: 190
CPU Clock Drive: 700mV
CPU Clock Skew: 0
CPU " " : 0
Ram: 9 9 9 26 2T tRFC 80
Here's the problem:
--I can get a stable OC at 3.8Ghz or 4Ghz on my 920 C0, P95 for 20 hours.
--However, I was not able to suspend to RAM or reboot w/o errors.
--Relaxed timings on RAM to 99926 cmd 80 and now I can cold or soft boot successfully. I cannot suspend to RAM though.
UPDATE:
Just had another BIOS warning on bootup. set my settings differently and booted right up, but I haven't tested for reboot. Here are my current settings:
CPU vCore: 1.393
QPI/Vtt: 1.36
CPU PLL: 1.88
RAM v 1.64 (BIOS allows only 1.64/1.66 not 1.65)
Sys Mem Multi.: 1140
CPU clock: 20 3.8Ghz
QPI/Link Speed 6.84GHz
Uncore Freq: 2470
Bclk: 190
CPU Clock Drive: 700mV
CPU Clock Skew: 0
CPU " " : 0
Ram: 9 9 9 26 2T tRFC 80
Comment