If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
So you're stuck at the 140-145 bottle limit. huh? Believe me I was frustrated as hell and wondering what the heck was wrong with my machine compared to others. In any case a tip from WIGGO actually got my machine to where it's at now. The secret...well for me it was in the NIC. I was using a 3COM 3905c-TXM NIC at first which didn't seem to like the higher FSB. So I tried a NETGEAR FA-311 and it hated that even more. So I tried a 3COM 3905C-TXNM <--the performance of this NIC is not quite the same as the TXM... I think it is somewhat software based so it is a bit slower. Anyhow this let me hit 160+ FSB. without the NIC I was able to hit 166FSB...stable. but since the NIC is a must I had to lower it a bit. I am at 1.85v should be the max on your board as well.
If you read my earlier posts...my system runs pretty cool but sounds more like a jet then anything else...put it this way it sounds like a complete server room with 12+ servers...all coming fomr one machine...not that enjoyable really.
Anyways...try the NIC thing
I'm using 256MB generic (CENTURY) PC-2700 CAS-2.5 DDR-RAM w/SAMSUNG Chips. I have them clocked at 5-2-2 when they should be 6-3-3. 1T off.
HSF:
VANTEC thin finned COPPER Heatsink/ 30CFM VANTEC FAN thin layer of thermal goop just the white stuff, not artic silver
CASE FANS:
Intake: 112CFM 120mm SUNON FAN
EXHAUST: 2 x 84CFM 80mm VANTEC Tornado FANS
I never ever thought about the NIC being the bottle neck. I currently use the Linksys 10/100 LNE100TX v.4 Maybe thats the btl-neck.
Im currently running the following:
System #1 - Linux FTP server Suse 8.0
MSI KT3 Ultra Latest Bios
Athlon 1.3 @105x13
256 meg PC2100 Generic with Micron (MT) modules 2x128
Memory at SPD/SPD all relaxed
16x DVD
Linksys 10/100
Onboard ALC650 sound
Diamond Stealth III 32meg agp
System #2
Abit KR7A-Raid Latest Bios
Athlon XP 1700+ @Stock until Cooler Master heatsink/fan arrives
1x 512 meg PC2100 Crucial
2x 128 meg PC2100 Crucial
1x 128 meg PC2100 Samsung
Maxtor 40gig 7200 ATA/100
Geforce 2 GTS @ 210/345 Detonator:20.72
Fast Writes,128 Aperature,4x,Vid Ram Cached All other Disabled
Linksys 10/100
SoundBlaster X-gamer (non-5.1)
8x4x32
Windows XP pro xp1 (Standard PC mode)
Looking at System 2 I know Im going to drop all but the one stick of 512. I'll go SPD/SPD all relaxed until i find the highest FSB i can get. At what point do you suggest upping the cpu voltage. ??
I didn't start upping my voltage until I hit 147+. At that rate I started using the max of 1.85v at about 157. However, things ran stable even at 1.75-1.80. I'm currently using 1.85v for max stability 162MHz. It seems with any higher rates I need to remove my NIC.
Comment